Home Hardware › Steel › Anchors

ZORO SELECT U30537.018.0250 Wall Anchor, 2-1/16" L, Steel, 50 PK

Wall Anchor, System of Measurement Inch, Wall Anchor Type Sleeve Anchor, Anchor Length 2 1/16 in, Anchor Diameter 3/16 in, Thread Size 3/16 In., Finish Zinc Plated, Material Steel, Compatible Material Drywall, Plaster, Drill Bit Size 3/8 in, Maximum... more

Midwest Air Tech 3 In. x 15 In. Red Steel Screw-In Earth Anchor 901111A

Screw into the ground to hold down tents canopies storage buildings fencing playground equipment trees planes as well as hundreds of other uses. Not for use on manufactured homes refer to manufactured home anchors and accessories. more

Hillman Tapper 3/16 in. D Steel Hex Head Concrete Screw Anchor 100 pk

State of the art thread design cuts into concrete. Tapper screws are designed for fastening applications in concrete block and brick. Use Tapper screws to attach electrical equipment two by fours downspout straps hose reels flag poles hurricane... more

Buildex Tapcon 24340 Screw Anchor Hex Drive Steel Climaseal

No inserts required. Drill a hole and drive an anchor. Replaces small diameter expansion anchors plugs and screws in light to medium duty applications. Reversible and removable. Thread design increases pullout values and lowers installation torque.... more

ZORO SELECT GCPT56334 DFS T-Anchor Screw Anchor, 3-3/4" L, Carbon Steel, 4 PK

T-Anchor, Toggle Anchor Type Male Toggle Anchor, System of Measurement Inch, Anchor Diameter 5/16 in, Thread Size 5/16 In.-18, Overall Length 3 3/4 in, Screw Length 3 3/4 in, Drive Type Not Applicable, Usable Length 2 3/4 in, Material Steel, Finish... more

ZORO SELECT GCPT56212 DFS T-Anchor Screw Anchor, 2-1/2" L, Carbon Steel, 4 PK

T-Anchor, Toggle Anchor Type Male Toggle Anchor, System of Measurement Inch, Anchor Diameter 5/16 in, Thread Size 5/16 In.-18, Overall Length 2 1/2 in, Screw Length 2 1/2 in, Drive Type Not Applicable, Usable Length 1 1/2 in, Material Steel, Finish... more

CROSBY 1018455 Anchor Shackle,Carbon Steel,4000 lb.

Anchor Shackle, Shackle Type Anchor Shackle, Lifting Capability For Lifting, Working Load Limit 4,000 lb, Compatible Sling Width 1 3/8 in, Width Between Eyes 3/4 in, Body Material Carbon Steel, Inside Length 1 7/8 in, Inside Width 1 1/4 in, Body... more

MKT FASTENING 1775000 Sup-R-Sleeve Sleeve Anchor, 3/8" Dia., 6" L, Carbon Steel

Sleeve Anchor, System of Measurement Inch, Anchor Diameter 3/8 in, Overall Length 6 in, Thread Size 5/16 In.-18, Drive Type Phillips, Head Type Flat, Washer Outside Diameter Not Applicable, Material Steel, Material Grade/Class Not Graded, Finish Zinc... more

CROSBY 1018419 Anchor Shackle,Carbon Steel,2000 lb.

Anchor Shackle, Shackle Type Anchor Shackle, Lifting Capability For Lifting, Working Load Limit 2,000 lb, Compatible Sling Width 1 in, Width Between Eyes 5/8 in, Body Material Carbon Steel, Inside Length 1 1/2 in, Inside Width 1 in, Body Thickness 3/8... more

CROSBY 1018400 Anchor Shackle,Carbon Steel,1500 lb.

Anchor Shackle, Shackle Type Anchor Shackle, Lifting Capability For Lifting, Working Load Limit 1,500 lb, Compatible Sling Width 7/8 in, Width Between Eyes 1/2 in, Body Material Carbon Steel, Inside Length 1 1/4 in, Inside Width 7/8 in, Body Thickness... more

ZORO SELECT U30537.025.0250 Wall Anchor, 2-1/2" L, Steel, 50 PK

Wall Anchor, System of Measurement Inch, Wall Anchor Type Sleeve Anchor, Anchor Length 2 1/2 in, Anchor Diameter 1/4 in, Finish Plain, Material Steel, Compatible Material Drywall, Plaster, Drill Bit Size 5/8 in, Minimum Material Thickness 1/8 in,... more

CROSBY 1018428 Anchor Shackle,Carbon Steel,2000 lb.

Anchor Shackle, Shackle Type Anchor Shackle, Lifting Capability For Lifting, Working Load Limit 2,000 lb, Compatible Sling Width 1 in, Width Between Eyes 5/8 in, Body Material Carbon Steel, Inside Length 1 1/2 in, Inside Width 1 in, Body Thickness 3/8... more

DEWALT 02826-PWR Zamac Nailin Nail Drive Anchor, 1/4" Dia., 2" L, Alloy Steel

Drive Anchor, Anchor Diameter 1/4 in, Overall Length 2 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Head Diameter 0.54 in, Head Height 0.140625 in,... more

DEWALT 02808-PWR Zamac Nailin Nail Drive Anchor, 1/4" Dia., 1" L, Alloy Steel

Drive Anchor, Anchor Diameter 1/4 in, Overall Length 1 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Head Diameter 0.54 in, Head Height 0.140625 in,... more

ZORO SELECT U70411.050.0700 Wedge Anchor, 1/2" Dia., 7" L, Carbon Steel Zinc

Wedge Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Thread Size 1/2 In.-13, Overall Length 7 in, Thread Length 5 1/4 in, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 1/2... more

ZORO SELECT U70411.025.0325 Wedge Anchor, 1/4" Dia., 3-1/4" L, Carbon Steel

Wedge Anchor, System of Measurement Inch, Anchor Diameter 1/4 in, Thread Size 1/2 In.-13, Overall Length 3 1/4 in, Thread Length 2 1/8 in, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size... more

DEWALT 05030S-PWR Lok-Bolt AS Sleeve Anchor, 1/2" Dia., 3" L, Carbon Steel Zinc

Sleeve Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Overall Length 3 in, Thread Size 3/8 In.-16, Drive Type External Hex, Head Type Hex, Nut Width 0.5625 in, Washer Outside Diameter 1 in, Material Steel, Material Grade/Class Not Graded,... more

ZORO SELECT GCPT56314 DFS T-Anchor Screw Anchor, 3-1/4" L, Carbon Steel, 4 PK

T-Anchor, Toggle Anchor Type Male Toggle Anchor, System of Measurement Inch, Anchor Diameter 5/16 in, Thread Size 5/16 In.-18, Overall Length 3 1/4 in, Screw Length 3 1/4 in, Drive Type Not Applicable, Usable Length 2 1/4 in, Material Steel, Finish... more

MKT FASTENING 2858500 GALV SUP-R-STUD + Wedge Anchor, 5/8" Dia., 5" L, Steel

Wedge Anchor, System of Measurement Inch, Anchor Diameter 5/8 in, Thread Size 5/8 In.-11, Overall Length 5 in, Thread Length 3 1/4 in, Eyelet Hole Size Not Applicable, Material Steel, Material Grade/Class Grade 2, Finish Galvanized, Compatible Material... more

MKT FASTENING 2612414 SUP-R-STUD + Wedge Anchor, 1/2" Dia., 4-1/4" L, Steel

Wedge Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Thread Size 1/2 In.-13, Overall Length 4 1/4 in, Thread Length 3 in, Eyelet Hole Size Not Applicable, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, Compatible... more

MKT FASTENING 2612334 SUP-R-STUD + Wedge Anchor, 1/2" Dia., 3-3/4" L, Steel

Wedge Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Thread Size 1/2 In.-13, Overall Length 3 3/4 in, Thread Length 2 1/2 in, Eyelet Hole Size Not Applicable, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, Compatible... more

ZORO SELECT U70411.025.0225 Wedge Anchor, 1/4" Dia., 2-1/4" L, Carbon Steel

Wedge Anchor, System of Measurement Inch, Anchor Diameter 1/4 in, Thread Size 1/4 In.-20, Overall Length 2 1/4 in, Thread Length 1 1/8 in, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size... more

DEWALT 06304-PWR Steel Dropin Flush Embedment Anchor, 1/4" Dia, 1" L, Carbon

Drop-In Anchor, Anchor Diameter 1/4 in, Overall Length 1 in, Thread Size 1/4 In.-20, Thread Depth 0.44 in, Thread Type Coarse, Material Steel, Finish Zinc Plated, Flange Style Flush, Drill Bit Size 3/8 in, Minimum Hole Depth 1 in, System of Measurement... more

DEWALT 06306-PWR Steel Dropin Flush Embedment Anchor, 3/8" Dia, 1-9/16" L,

Drop-In Anchor, Anchor Diameter 3/8 in, Overall Length 1 9/16 in, Thread Size 3/8 In.-16, Thread Depth 0.625 in, Thread Type Coarse, Material Steel, Finish Zinc Plated, Flange Style Flush, Drill Bit Size 1/2 in, Minimum Hole Depth 1 9/16 in, System of... more

ZORO SELECT U30538.012.0200 Wall Anchor, 2" L, Steel, 100 PK

Wall Anchor, System of Measurement Inch, Wall Anchor Type Sleeve Anchor, Anchor Length 2 in, Anchor Diameter 1/8 in, Thread Size M4, Drive Type Phillips, Finish Plain, Material Steel, Compatible Material Drywall, Plaster, Drill Bit Size 5/16 in,... more

DEWALT 05015S-PWR Lok-Bolt AS Sleeve Anchor, 3/8" Dia., 1-7/8" L, Carbon Steel

Sleeve Anchor, System of Measurement Inch, Anchor Diameter 3/8 in, Overall Length 1 7/8 in, Thread Size 5/16 In.-11, Drive Type External Hex, Head Type Hex, Nut Width 0.5 in, Washer Outside Diameter 0.81 in, Material Steel, Material Grade/Class Not... more

CROSBY 1018446 Anchor Shackle,Carbon Steel,3000 lb.

Anchor Shackle, Shackle Type Anchor Shackle, Lifting Capability For Lifting, Working Load Limit 3,000 lb, Compatible Sling Width 1 1/8 in, Width Between Eyes 3/4 in, Body Material Carbon Steel, Inside Length 1 3/4 in, Inside Width 1 1/8 in, Body... more

DEWALT 02278-PWR Wall-Dog Screw Anchor, 2" L, Steel, 100 PK

Wall Anchor Screw, Anchor Diameter 1/4 in, Screw Size 2 in, Overall Length 2 in, Head Type Wafer, Head Width Not Applicable, Drive Type Phillips, Material Steel, Finish Zinc Plated, Material Grade/Class 1018, Removable Removable, Compatible Material... more

DEWALT 05025S-PWR Lok-Bolt AS Sleeve Anchor, 1/2" Dia., 2-1/2" L, Carbon Steel

Sleeve Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Overall Length 2 1/2 in, Thread Size 3/8 In.-16, Drive Type External Hex, Head Type Hex, Nut Width 0.5625 in, Washer Outside Diameter 1 in, Material Steel, Material Grade/Class Not... more

DEWALT 03601-PWR Drive Nail Drive Anchor, 3/8" Dia., 2" L, Steel Zinc Plated,

Hammer Drive Pin Anchor, Anchor Diameter 3/8 in, Overall Length 2 in, Anchor Material Steel, Finish Zinc Plated, Head Type Round, Head Height 0.1875 in, Head Diameter 0.75 in, Drill Bit Size 3/8 in, Minimum Installation Depth 1 7/8 in, Drive Pin Anchor... more

ZORO SELECT U09100.037.0400 Sleeve Anchor, 3/8" Dia., 4" L, Carbon Steel Zinc

Sleeve Anchor, System of Measurement Inch, Anchor Diameter 3/8 in, Overall Length 4 in, Thread Size 5/16 In., Drive Type External Hex, Head Type Hex, Nut Width 0.4889 in, Washer Outside Diameter 0.7047 in, Material Steel, Material Grade/Class Not... more

MKT FASTENING 2612700 SUP-R-STUD + Wedge Anchor, 1/2" Dia., 7" L, Steel Zinc

Wedge Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Thread Size 1/2 In.-13, Overall Length 7 in, Thread Length 4 in, Eyelet Hole Size Not Applicable, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, Compatible Material... more

ZORO SELECT U70651.062.0400 Nail Drive Anchor, Steel 5 PK

Hammer Drive Pin Anchor, Anchor Diameter 5/8 in, Overall Length 4 in, Thread Size 5/8 In.-11, Thread Length 1 9/16 in, Anchor Material Steel, Pin Material Steel, Finish Zinc Yellow, Head Type Flat, Head Diameter Not Applicable, Head Height Not... more

ZORO SELECT U70650.025.0075 Nail Drive Anchor, Alloy Steel 100 PK

Hammer Drive Pin Anchor Set, Anchor Diameter 1/4 in, Overall Length 3/4 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Drill Bit Size 1/4 in, Minimum... more

ZORO SELECT U70651.031.0200 Nail Drive Anchor, Steel 25 PK

Hammer Drive Pin Anchor, Anchor Diameter 5/16 in, Overall Length 2 in, Thread Size 5/16 In.-18, Thread Length 3/4 in, Anchor Material Steel, Pin Material Steel, Finish Zinc Yellow, Head Type Flat, Head Diameter Not Applicable, Head Height Not... more

ZORO SELECT U70650.025.0150 Nail Drive Anchor, Alloy Steel 100 PK

Hammer Drive Pin Anchor Set, Anchor Diameter 1/4 in, Overall Length 1 1/2 in, Thread Size Not Applicable, Thread Length Not Applicable, Anchor Material Zamac Alloy, Pin Material Steel, Finish Zinc Plated, Head Type Round, Drill Bit Size 1/4 in, Minimum... more

ZORO SELECT U70651.075.0500 Nail Drive Anchor, Steel 4 PK

Hammer Drive Pin Anchor, Anchor Diameter 3/4 in, Overall Length 5 in, Thread Size 3/4 In.-10, Thread Length 1 15/16 in, Anchor Material Steel, Pin Material Steel, Finish Zinc Yellow, Head Type Flat, Head Diameter Not Applicable, Head Height Not... more

ZORO SELECT 38DWG Rod Hanger Wedge Anchor, 1/2" Dia., 2-3/8" L, Steel Plain, 4

Wedge Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Thread Size 3/8 In.-16, Overall Length 2 3/8 in, Thread Length 7/8 in, Eyelet Hole Size Not Applicable, Material Steel, Finish Plain, Compatible Material Brick, Concrete, Drill Bit Size... more