Home Hardware › Steel › Anchors

National Hardware N223-693 3250BC Anchor Shackle in Galvanized Steel 1/2

Whether for home farm builder or industrial customers National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality innovation and... more

The ROP Shop | (30) 3/8 Steel D Ring Tie Downs Heavy Duty Chain Rope Cable Anchor Bolt on

(30) 3/8 Steel D Ring Tie Downs Heavy Duty Chain Rope Cable Anchor Bolt on Please review all product information to ensure that this product is compatible with your unit. This is a Quality ECHO Brand Product A Message to the Customer The ROP Shop staff... more

Tapcon 1/4 in. D X 2-3/4 in. L Steel Hex Head Concrete Screw Anchor

No inserts required. Drill a hole and drive an anchor. Replaces small diameter expansion anchors plugs and screws in light to medium duty applications. Reversible and removable. Thread design increases pullout values and lowers installation torque.... more

Tapcon 1/4 in. D X 2-3/4 in. L Steel Hex Head Concrete Screw Anchor 150 pk

As the original concrete screw anchor that revolutionized the construction world Tapcon brand concrete anchors deliver the ease of use superior precision and unparalleled performance that professionals demand. Tapcon concrete screw anchors draw from... more

Hillman 1/2 in. D X 4-1/2 in. L Steel Round Head Wedge Anchor 10 pk

Power Fasteners Power Stud anchor . Steel/zinc-plated. For use in concrete stone brick and block. Ideal for medium to heavy-duty loads. Drill hole same diameter as anchor. Exact hole depth is not required. more

Manufacturer Varies Wall Anchor Steel 1 3/8 in L PK100 U30538.012.0137

Wall Anchor System of Measurement Inch/Metric Wall Anchor Type Sleeve Anchor Anchor Length 1 3/8 in Anchor Diameter 1/8 in Thread Size M4 Finish Zinc Plated Material Steel Compatible Material Drywall Plaster Drill Bit Size 5/16 in Maximum Ultimate... more

Fehr 5/16 Anchor Shackle 5/16 in Trade 0.5 ton Working Load Commercial Grade Steel Galvanized

Forged steel hot dipped galvanized. Open-throat design wide bow screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning Inspect regularly. Replace if worn distorted or damaged. Ensure... more

Campbell Chain Zinc-Plated Forged Steel Anchor Shackle 2000 lb. (Pack of 5)

1/2 Zinc Plated Screw Pin Anchor Shackle Design Factor 5 To 1 WLL 2 000 LB UPC Tagged. more

Sammys 8113910 #14 Black Hex Nut Driver for Vertical Rod Anchor Installation Steel 2 1/2 in. x 3/4 in.

This Sammys #14 Black Nut Driver enables easy and safe installation of Sammys rod hangers. The female hex inside the driver fits perfectly with Sammys hex screw heads. This ultra-durable uniquely designed driver spins free on the screw after... more

1/8 Hollow Wall Anchor Drive-Type Combo (Phillips/Slotted) Pan Head Long Low Carbon Steel Zinc Plated Pk 100

PRODUCT SPECIFICATIONS Part #: 0000-111417 Fastener Type: Hollow Wall Anchor Drive-Type Combo (Phillips/Slotted) Pan Head Long Size Description: 1/8 Diameter/Nominal Size: 1/8 System of Measurement: Inch Material: Low Carbon Steel Finish: Zinc Plated... more

Hillman Fasteners 371183 Spike Concrete Anchors 1/4 x 3 Carbon Steel

The Spike Anchor is a patented one-piece tamper-proof anchor for use in concrete block or stone. The Spike anchor is formed with an s shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is... more

5/8 x 3 Sleeve Anchor Hex Nut Low Carbon Steel Zinc Plated Pk 10

PRODUCT SPECIFICATIONS Part #: 0000-125106 Fastener Type: Sleeve Anchor Hex Nut Size Description: 5/8 x 3 Diameter/Nominal Size: 5/8 Length: 3 System of Measurement: Inch Material: Low Carbon Steel Finish: Zinc Plated Drive Type: External Hex Average... more

Anchor Brand 103-04-022 1.62 in. Jumbo Combination Wrench Carbon Steel

Jumbo Combination Wrenches 1-5/8 in Opening 24 in Anchor Brand Jumbo Combination Wrenches Opening Type: Open/Box Measuring System: SAE Finish: Nickel Chrome Plated No. of Points: 12 Material: Carbon Steel Overall Length [Nom]: 24 in Offset Angle: 15... more

Hillman Fasteners 371958 Zinc-Plated Steel Wedge Anchor 3/4 X5.5

The Power-Stud+ SD1 is a fully threaded torque controlled wedge expansion anchor that is designed for concrete applications. Suitable base materials are normal-weight and sand-lightweight concrete concrete over steel deck and grouted concrete masonry.... more

Cobra Anchors 095Y Spring Toggle Bolt 3 in L Steel 118 lb

The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open behind the wall... more

WallClaw Anchors .25 in. D X 2 in. L Plastic/Steel Pan Head Wallboard Anchors 10 pk

Features a finish nail starter and a blade-like body that easily penetrates drywall with minimal damage to the wall. The anchor s wide platform fins near the head provide greater load bearing capacity more

1/4-20 x 1 in. Sammys Rod Anchor Super Screw Swivel Head with 3/8 in. Threaded Rod Fitting for Steel (Pkg=25)

This Sammys 8137957 Rod Hanger provides a secure anchor for threaded rods with its 3/8 in. female fitting on the screw head. The Teks technology drill bit on the tip of the fastener drills its own hole and grips solidly into the steel base securing a... more

TOGGLER SNAPTOGGLE BA Toggle Anchor Zinc-Plated Steel Channel 3/8 to Grip Range For 3/ UNC Fastener Size (Pack of 50) 1 Pack

50PK3/16-24 BA TOG Bolt more

Hillman Fasteners 370988 Zinc-Plated Steel Wedge Anchor 1/2 X3.75

The Power-Stud+ SD1 is a fully threaded torque controlled wedge expansion anchor that is designed for concrete applications. Suitable base materials are normal-weight and sand-lightweight concrete concrete over steel deck and grouted concrete masonry.... more

1 Nominal Chain Size 12.5 Ton Alloy Steel Screw Anchor Shackle

1 Nominal Chain Size 12.5 Ton Alloy Steel Screw Anchor Shackle 1 Diam 1-1/8 Pin Diam 3-3/4 High x 1-11/16 Wide Inside Jaw 2-1/2 Inside Width 2-3/8 Max Body Thickness (MOQ=1 Pkg Qty=1) more

ITW Brands 24325 1/4 x 2 1/4 Steel Hex Washer Head Concrete Anchors

SCREW MASONRY HEX 1/4X2-1/4 Specifications: Suitable for: Sill Plate Electrical Equipment Furring Strips Fast installation. Replaces small diameter expansion anchors plugs and screws in light to medium duty applications. No need to pre-spot hole. No... more

Hillman 5/8 in. D X 7 in. L Steel Round Head Wedge Anchor 10 pk

Power Fasteners Power Stud anchor . Steel/zinc-plated. For use in concrete stone brick and block. Ideal for medium to heavy-duty loads. Drill hole same diameter as anchor. Exact hole depth is not required. more

1/4-14 x 2 in. Sammys Rod Anchor Super Screw with Teks 3/8 in. Threaded Rod Fitting for Steel (Pkg.=25)

This Sammys 8052957 Rod Hanger provides a secure anchor for threaded rods with its 3/8 in. female fitting on the screw head. The Teks technology drill bit on the tip of the fastener drills its own hole and grips solidly into the steel base thus... more

5/16 x 2 1/2 Sleeve Anchor Hex Nut Low Carbon Steel Zinc Plated Pk 100

PRODUCT SPECIFICATIONS Part #: 0000-117324 Fastener Type: Sleeve Anchor Hex Nut Size Description: 5/16 x 2 1/2 Diameter/Nominal Size: 5/16 Length: 2 1/2 System of Measurement: Inch Material: Low Carbon Steel Finish: Zinc Plated Drive Type: External Hex... more

Hillman Fasteners 371960 Zinc-Plated Steel Wedge Anchor 3/4 X7

Power Fasteners Power Stud anchor . Steel/zinc-plated. For use in concrete stone brick and block. Ideal for medium to heavy-duty loads. Drill hole same diameter as anchor. Exact hole depth is not required. more

Campbell T9600435 Anchor Shackle 400 lb Working Load Carbon Steel Zinc

Campbell Chain Finish: Zinc Plated Material: Forged Steel Product Type: Anchor Shackle Color Family: Silver Weight Capacity: 400 lb. Number in Package: 1 pk Packaging Type: Bulk Eye: 1/4 in. Connection Method: Screw Pin more

TOGGLER SNAPTOGGLE BB Toggle Anchor Zinc-Plated Steel Channel 3/8 to Grip Range For 1/ UNC Fastener Size (Pack of 50)

Features. more

Hillman 371942 Wedge Anchor 1/2 D X 5-1/2 L Steel Round Head

The Power-Stud is a torque controlled wedge expansion anchor that is designed for concrete applications. Has various DOT approvals including Cal Trans listing for Stud Mechanical Expansion Anchors . It is building code approved and can also be used... more

Anchor Shackle - Bolt Type - 3/8 Steel - 1 Ton - 4 Pack

US Cargo Control Bolt Type Anchor Shackle is made of tough durable hot-dip galvanized steel. This galvanized anchor shackle has a rounded “O� shape look which allows this type of shackle to take a load from many directions without developing significa more

Campbell 5412005 1-1/4 in. Screw Pin Forged Carbon Steel Anchor Shackle - Painted Blue

Shackle Bodies Are Drop-Forged Carbon Steel. Self Colored (Painted Blue). C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271 Type IVA Grade A Class 2. Working Load Limit Size Manufacture Name Date Code and USA Permanently... more

Wideskall #6 - 1.5 inch Heavy Duty Zinc Plated Steel Hollow Drive Wall Anchors for 1/2 inch drywall board Pack of 120

High quality heavy duty molly bolt drive hollow drive wall anchor screws set. All the anchors are made of high quality zinc plated carbon steel rust resistance and corrosion resistance durable enough for you to hanging items. Heavy-duty hollow drive... more

Peakworks Reusable Steel Roof Anchor Bracket

This roof anchor bracket is designed to be part of a personal fall arrest system; Connect anchor to wood surfaces with screw size of 3 In. x #10 (32 screws/16 per side). Made with superior quality materials ensuring high strength and durability to... more

Tapcon 1/4 in. D X 1-1/4 in. L Steel Hex Head Concrete Screw Anchor 75 pk

No inserts required. Drill a hole and drive an anchor. Replaces small diameter expansion anchors plugs and screws in light to medium duty applications. Reversible and removable. Thread design increases pullout values and lowers installation torque.... more

12-24 x 1 1/2 in. Sammys Rod Anchor Super Screw with Teks 3/8 in. Threaded Rod Fitting for Steel (Pkg.=25)

This Sammys 8046957 Rod Anchor provides a secure anchor for threaded rods with its 3/8 in. female fitting on the screw head. The Teks technology drill bit on the tip of the fastener drills its own hole and grips solidly into the steel base thus... more

National Hardware N223-685 Anchor Shackle And Pin 3/8 Inch Galvanized Forged Steel Each

3/8 inch galvanized anchor shackle with screw pin designed for use in marine industrial and construction applications where maximum corrosion protection is desired threaded screw pin is for easy rigging boxed loose. Meet federal specifications... more

Campbell T9640335 Screw Pin Anchor Shackle Forged Steel Galvanized 3/16 Trade 1/3 ton Working Load Limit Pack of 10

Campbell T9640335 shackle screw pin 3/16 H/g Tagged more

1/4 x 1 3/8 Sleeve Anchor Acorn Nut Low Carbon Steel Zinc Plated Pk 100

PRODUCT SPECIFICATIONS Part #: 0000-112808 Fastener Type: Sleeve Anchor Acorn Nut Size Description: 1/4 x 1 3/8 Diameter/Nominal Size: 1/4 Length: 1 3/8 System of Measurement: Inch Material: Low Carbon Steel Finish: Zinc Plated Average Piece Weight:... more

Campbell T9640435 Screw Pin Anchor Shackle Forged Steel Galvanized 1/4 Trade 1/2 ton Working Load Limit Pack of 10

Campbell began in 1919 with the incorporation of the Victory chain company which eventually became the Campbell chain company. The business was extremely successful expanding to offer its customers a constantly increasing line of products over the... more