You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
Best Seller | PRIMELINE TOOLS GD 52212 Steel, Heavy Duty Short Stem Roller (2 Pack) This is a heavy-duty steel garage door roller with steel inner race. It features 10 ball bearings and a short stem. Same as the Prime-Line GD 52111 but this has a shorter stem. •Used to replace roller bearings on existing sectional garage doors •Short... ... more | go to store |
This is a plain back tandem plain back roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable. Used by Keller as well as a variety of other manufacturers, primarily on vinyl patio... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball-bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare, and 1-5/8 in. height. It is rear adjusting with a threaded mounting hole on the... ... more | go to store |
This is a plain back tandem roller assembly used by several patio door manufacturers. It has an inner housing with tandem inline 1-1/2 in. concave (center grooved) steel ball bearing rollers set in a stamped steel housing with rear adjustment. The... ... more | go to store |
This is a plain back diecast patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a #10-32 threaded hole on... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-1/8 in. tall with a 13/16 in. flare. It is rear adjusting with a 1/4-20 threaded mounting hole on... ... more | go to store |
This is a drive-in style patio door roller assembly used on Pella wood patio doors. It is 11/16 in. wide x 1-11/16 in. deep and 2-3/4 in. long. It is driven into a rectangular mortise in the bottom of the door. When installing, the adjustment screw... ... more | go to store |
This is a unique, one of a kind, trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two... ... more | go to store |
This is a plain back tandem roller assembly used by Smith and Carry and a variety of other sliding patio door manufacturers of metal framed patio doors. It has an in-line tandem inner housing with 1-1/2 in. concave steel ball bearing rollers set in a... ... more | go to store |
This sliding screen door roller assembly fits onto the spring-loaded arm of a Columbia corner insert. The roller housing is stamped steel with a 1 in. steel ball bearing roller installed. These rollers are a replacement roller for the discontinued... ... more | go to store |
This roller is constructed from steel. It comes affixed to an adjustable steel housing. Used by Air Control, Howmet, Krestmark, and a variety of other sliding glass door manufacturers. | Prime-Line Sliding Door Roller Assembly w/ 1-1/2 in. Steel Ball... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 5/8 in. wide, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball-bearing roller. It has a plain back housing that is 3/4 in. wide and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 23/32 in. wide with a 3/4 in. dimple width and 1-3/16 in. tall. It is rear adjusting with a threaded... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 21/32 in. wide with a 3/4 in. flare and 1-1/8 in. tall. It is rear adjusting with a threaded mounting... ... more | go to store |
This is a plain back patio door roller assembly with a 1-11/16 in. concave or grooved nylon ball bearing roller used by Arcadia and a variety of other patio door manufacturers. The stamped steel housing has a unique design that is 3/4 in. wide, 1-5/16... ... more | go to store |
This is a 1-1/2 in. diameter concave Precision steel ball bearing roller replacement, used on several patio and wardrobe door roller assemblies. Precision rollers are made of hardened steel and have a sealed ball bearing race. It has a 7/32 in. built... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It is 3/4 in. wide with a 27/32 in. flare, 1-5/8 in. tall and 1-1/2 in. long (not including the inner roller housing). It is rear adjusting... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 7/8 in. flare, and 1-9/16 in. tall. It is rear adjusting with a 1/4-20 threaded... ... more | go to store |
This is a plain back tandem roller assembly with two 1-1/4 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable and is used by a variety of manufacturers of vinyl, aluminum or wood doors. The housing is a plain... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/2 in. tall with a flare width of 13/16 in. It is a rear adjusting with a 1/4-20 threaded... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/4 in. tall with a flare width of 13/16 in. with a rear adjusting screw. Features a... ... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... ... more | go to store |
This sliding glass door roller assembly is constructed from steel and features height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and... ... more | go to store |
This is a plain back tandem roller assembly with a 1/4-20 threaded mounting hole and two narrow mounting slots on the back end. These slots slide onto an opposite shaped extrusion on the door frame. The adjustable stamped steel housing is 11/16 in.... ... more | go to store |
This is a U-back, patio door roller assembly with a flat 1-1/2 in. ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw or bolt is... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved Plastic ball bearing roller. It has a plain back housing that is 5/8 in. wide and 1 in. tall with two mounting tabs/hooks on the top. It is rear adjusting with a 1/4-20... ... more | go to store |
This is a 1-1/4 in. diameter concave Precision steel ball bearing roller replacement, used on several patio and wardrobe door roller assemblies. Precision rollers are made of hardened steel and have a sealed ball bearing race. It has a 7/32 in. built... ... more | go to store |
This is a unique back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a unique back housing made of extruded aluminum. The housing is 7/8 in. 1-3/16 in. tall and 2-1/16 in. long. This style of unique... ... more | go to store |
This mirror door roller is constructed from nylon. It comes attached to an adjustable steel housing. This type of roller fits on Contractors mirror door. | Prime-Line Mirror Door Roller Assembly, 1-7/16 in. Roller, Steel Housing & Ball Bearings,... ... more | go to store |
This is an F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
This is a U-back patio door roller assembly with a 1-1/2 in. concave (center grooved) steel ball-bearing roller. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw is tightened. The housing is... ... more | go to store |
This is a U-back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting... ... more | go to store |
This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
Ads related to Prime-Line 1-1/2 in. Steel Ball Bearing, Plain Back, Roller Assembly Single Pack in Yellow | 5.35 H x 3.75 W x 0.85 D in | Wayfair D 1750