Power Tools › Irwin › counterbore high speed steel 0

Irwin Unibit 1/8 to 1/2 in. x 6 in. L High Speed Steel Step Drill Bit 1 pc.

Drill a range of holes without changing bits more

IRWIN UNIBIT 1 Step Drill Bit, 13 Hole Sizes, 1/8 in to 1/2 in, 1/32 in Step

Step Drill Bit, High Speed Steel, Black Oxide, 1/8 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 3/16 in Overall Length, Maximum Drilling Depth 1/8 in more

Irwin Unibit 3/16 to 1/2 in. x 6 in. L High Speed Steel Step Drill Bit 1 pc.

Drill a range of holes without changing bits more

Irwin Vise Grip VGPUN2 Vise Grip No. 2 High Speed Steel Fractional Self Starting Unibit Drill Bit

Single flute cutting edge for greater control through steps. Hex shank prevents slipping in drill chuck. New Speed Point tip penetrates faster than previous Unibits and prevents walking. Ideal for drilling holes into thin material such as stainless... more

#2 Unibit Self-Starting Stairstep Bit 6-Step 3/16 To 1/2 Dia 3/8 Depth

This IRWIN Unibit #2 High-Speed Steel Fractional Self-Starting Step Drill Bit features a single-flute cutting edge for greater control through each of its 6 steps. The sharp SpeedPoint tip penetrates fast and helps prevent walking while the hex shank... more

Irwin Tools UniBit 3/16-Inch to 1/2-Inch Step-Drill Bit 1/4-Inch Shank 10232

This IRWIN Unibit #2 High-Speed Steel Fractional Self-Starting Step Drill Bit features a single-flute cutting edge for greater control through each of its 6 steps. The sharp SpeedPoint tip penetrates fast and helps prevent walking while the hex shank... more

IRWIN UNIBIT 2 Step Drill Bit, 6 Hole Sizes, 3/16 in to 1/2 in, 1/16 Step

Step Drill Bit, High Speed Steel, Black Oxide, 3/16 in to 1/2 in Size Range, Hex, 1/4 in Shank Hex Size, 3 1/4 in Overall Length, Maximum Drilling Depth 5/16 in more

Irwin 1 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3-Flat Secure-Grip hammer/drill bits provide superiority in regards to quality performance and longevity of life. The 3-Flat Secure-Grip shank is designed to fit in all 1/2 inch 3-jaw hammer/drill chucks and reduces the possibility of the bit spinning... more

Irwin 1/2 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit Straight Shank 1 pc.

Masonry for use in hammer drills and standard rotary drills. Carbide tipped for maximum wear resistance and capacity to withstand high impact. Slotted tip for faster chip removal. Black oxide coating for extra durability and corrosion resistance.... more

Irwin 3/4 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

3/4 inch Irwin 12 inch straight with 1/2 inch shank carbide tipped masonry drill bit carbide tipped for maximum wear resistance and capacity to withstand high impact patented flute geometry for faster chip removal 12 inch length for deep drilling... more

IRWIN INDUSTRIAL Tool 12413 3/4 High Speed Steel Countersink Bit

3/4 High Speed Steel Countersink Drill Bit Tip Is Milled & Precision Ground To 82 Degrees For Countersinking Into Most Machin able Materials Engineered With Premium High Speed Steel With Black Oxide Coating For Corrosion Resistance Features 5 Flutes... more

Irwin 5/8 in. Dia. x 12 in. L High Speed Steel Hammer Drill Bit 1/2 in. Straight Shank 1 pc.

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53 HRC shot-peened double-tempered finish flute geometry removes dust from the hole quicker copper braze material gives high heat... more

IRWIN INDUSTRIAL Tool 12411 1/2 High Speed Steel Countersink Bit

Precision ground 82-degree tip for countersinking most machineable metals wood or plastic. Made from industrial grade High-Speed Steel for increased durability. Black oxide finish resists corrosion. Five-flute design reduces vibration for smoother... more

Irwin 1/2 in. Dia. High Speed Steel Countersink 1 pc.

IRWIN® Metal Countersinks is made from industrial grade high speed steel for increased durability more

Irwin 3/8 in. X 6 in. L High Speed Steel Percussion Drill Bit 1 pc

IRWIN Rotary Percussion Bits has patented flute geometry to remove dust from the hole quicker for fast drilling and long life more

Irwin Turbomax Multi Size Dia. x Multiple L High Speed Steel Drill Bit Set Straight Shank 15 pc.

Turbo point for no slip starting on hard materials prevents walking of drill bit. Gold oxide coating for additional corrosion resistance. Can be used for drilling in metal wood or plastic. Jobber length. Set includes: (2) 1/16 5/64 (2) 3/32 7/64 (2)... more

Irwin 5/8 - 1-3/4 in. Dia. x 5-1/2 in. L High Speed Steel Wood Boring Bit 7/16 in. 6-Flat Shank 1 pc.

Lockhead Drill Press Adjustable Wood Bit 2 Cutters: 5/8 -1 and 1 -1-3/4 9/32 Shank Size 5-1/2 Overall Length Wedge Type Blade Lock and Slow Feed SScrew Point Special Precision Ground Shank Has 3 Equally Spaced Flats For Use In Drill Presses Having 3... more

Irwin 5/8 to 1-3/4 in. X 5-1/2 in. L High Speed Steel Adjustable Wood Boring Bit 1 pc

IRWIN Drill Press Adjustable Wood Bits features adjustable cutting blade bores a variety of hole sizes more

IRWIN 44801 Adjustable Spade Bit

Adjustable Spade Drill Bit, 1 3/4 in Drill Bit Size, Straight, High Speed Steel, Shank Diameter 1/4 in, Overall Length 5 1/2 in, Bright (Uncoated), Maximum Drilling Depth 4 in more

Irwin 62132 Aircraft Extension HSS Fractional Straight Shank Drill Bit 12 x1/2

Irwin Aircraft Extension High Speed Steel Fractional Straight Shank Drill Bit is ideal for drilling in hard-to-reach areas and for running wires and cable. Bit is constructed of M-2 high speed steel for the best combination of strength heat resistance... more

Hanson HSDR12A/CD 1/2

Features and Benefits: Ideal for drilling in hard-to-reach areas and for running wires and cable Bit is constructed of M-2 high speed steel for best combination of strength heat resistance and wear resistance For general use in wood metal and plastic... more

DRS&D1/2SK1 1/2

Drill Bit High Speed Steel 1/2 Reduced Shank 6 Long 1-1/2 in Tube more

Hanson 8PC S&D DR-8-PC SET

Features and Benefits: 8-piece 1/2 reduced shank silver & deming high speed steel drill bit set Constructed of M-7 high speed steel for high resistance to abrasion Three flatted shank design provides better chuck grip while reducing slippage Ideal for... more

17/32 REDUCED SHANK

Features and Benefits: Bit is constructed of M-7 high speed steel for high resistance to abrasion during tough drilling applications Three flatted shank design provides better chuck grip and reduces slippage; ideal for use in keyless chucks All Silver... more

Hanson BIT DRI 1 REDUCED SHANK

Features and Benefits: Bit is constructed of M-7 high speed steel for high resistance to abrasion during tough drilling applications Three flatted shank design provides better chuck grip and reduces slippage; ideal for use in keyless chucks All Silver... more

HAN91140

Features and Benefits: Bit is constructed of M-7 high speed steel for high resistance to abrasion during tough drilling applications Three flatted shank design provides better chuck grip and reduces slippage; ideal for use in keyless chucks All Silver... more

Hanson HSDR12A/CD 1/4

Features and Benefits: Ideal for drilling in hard-to-reach areas and for running wires and cable Bit is constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance For general use in wood metal and... more

Hanson HS DR CD 3/8

Features and Benefits: Constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance Standard 118 degree point for use in wood metal and plastic Overall length: 3-1/8 more

Hanson HS DR CD 15/64

Features and Benefits: Constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance Standard 118 degree point for use in wood metal and plastic Overall length: 2-7/16 more

Hanson HSDR12A/CD 3/8

Features and Benefits: Ideal for drilling in hard-to-reach areas and for running wires and cable Bit is constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance For general use in wood metal and... more

Hanson DRILL 9/32 HSS HD

Features and Benefits: Bit is constructed of M-2 high speed steel for the best combination of strength heat resistance and wear resistance For general use in wood metal and plastic Black oxide coating resists corrosion 135 degree split point ensures a... more

Hanson 60PC WIRE GAUGE NUMBER DRILL BIT SET

Features and Benefits: Used where more precisely sized holes are required Drills exact hole size; ideal for tapping Bits are constructed of M-2 high speed steel for best combination of strength heat resistance and wear resistance Standard 118 degree... more

Hanson 5/8 COUNTERSINK

Features and Benefits: Precision ground 82 degree tip for countersinking most machinable metals wood or plastic Made from industrial grade high speed steel for increased durability Includes a black oxide finish for added corrosion resistance Five flute... more

IRWIN INDUSTRIAL TOOL 12412 Countersink 5/8

High speed steel with black oxide coating for corrosion resistance. 5 flute design reduces vibration for smoother drilling. Precision-ground 82 deg Degree tip for countersinking into most Machin able metals. 1/4 Round shank compatible with all hand... more

Hanson BIT DRI 5/16 TURBOMAX CARDED

Features and Benefits: Self centering tip for clean fast starts Jet Point® tip for clean entry and faster drilling and stays sharp Drills more holes and is faster than other leading drill bits High speed steel features a black body and gold flute... more

Hanson BIT DRI 1/16 TURBOMAX CARDED 2 PCK

Features and Benefits: Self centering tip for clean fast starts Jet Point® tip for clean entry and faster drilling and stays sharp Drills more holes and is faster than other leading drill bits High speed steel features a black body and gold flute... more

Hanson 21/64 TURBOMAX DRILL BIT CARDED

Features and Benefits: Self centering tip for clean fast starts Jet Pointr tip for clean entry and faster drilling and stays sharp Drills more holes and is faster than other leading drill bits High speed steel features a black body and gold flute Three... more

Hanson BIT DRI 7/64 TURBOMAX CARDED 2 PCK

Features and Benefits: Self centering tip for clean fast starts Jet Pointr tip for clean entry and faster drilling and stays sharp Drills more holes and is faster than other leading drill bits High speed steel features a black body and gold flute Three... more