Miscellaneous Office & School Supplies › youngdale 65 1 2 inch

Climax Metal Products Shaft Collar Clamp 2Pc 1-1/2 In Steel 2C-150

Shaft Collar System of Measurement Inch Bore Type Round Bore Diameter 1 1/2 in Bore Thread Size Not Applicable Collar Outside Diameter 2 3/8 in Inside Height to Flat Not Applicable Clearance Diameter 2.63 in Collar Width 9/16 in Collar Material Carbon... more

Kokuyo Inkjet Label 65 Sides KJ-8651-100

[Paper size] A4 (297 x 210mm);�Number of sides】 65 sides;[Size of 1 piece] 21.2 x 38.1mm;[Paper thickness] Total thickness 0.18 mm (label body: 0.12 mm);[number of sheets] 100 sheets Please note that some of the models are made exclusively for... more

2.5 L x 1.25 H Clear Wood Shelf Label Holder Clips & Grips On to Shelves 3/4 Thick - 20 Pack

These wood shelving UPC label holders clip on to shelves that measure 3/4 of an inch thick. more

Officemate 1 Hole Punch with Soft Grip 8 Sheet Capacity Black 2 Each Per Pack Paper Punches (90076)

Nickel plated hand punch with catcher attached has a 1 inch reach and punches 0.25 inch holes. Padded handle for a more comfortable grip. Punches 8 sheets of 20 lb. Paper. more

Patchwork Scissors L (9 1/2 )

Clover Patchwork 9-1/2-Inch Large Scissors. Used for cutting multiple layers of fabric for cutting pieces for patch work. more

Sellstrom Nylon Super Slim Welding Helmet with 4-1/4 x 2 Sel-Snap Fixed Front Black S28501

Sellstrom Super Slim bucket style welding helmet with 4-1/4-inches width by 2-inches height Sel-Snap lift front. Welding helmet is made from Super Tuff nylon which is lighter than fiberglass and extremely durable. The patented Sel-Snap lens retention... more

Fellowes Wire Bindings 1/2 Diameter 100 Sheet Capacity Black 25/Pack 5255401

Create professional-looking booklets out of loose papers with these Fellowes 0.5-inch black wire binding spines. Deliver stellar reports that are easy to flip through with these 0.5-inch black wire binding spines. The steel double-wire construction... more

#6 Heavy Duty Wide Crown Staples - 1/2 - 1000 ct.

Dimensions of our Surebonder 11012 #6 Heavy Duty DuoFast Type Staples are 1/2-Inch leg length and .485-Inch wide crown. 1000 Staples per box. Applications but not limited to Canvas Roofing Paper Carpeting Felt Stripping etc. Surebonder supplies high... more

Onsrud Engraving Tool 1/2 L of Cut Carbide 37-07

Engraving Tool Single End 30 Degrees Carbide Bright (Uncoated) Fractional Inch 0.0300 in 1/2 in WARNING: Cancer - www.P65Warnings.ca.gov - more

Victor Victor Series 1-MTHP Size 2 Cutting Tip 0333-0355

Victor 0333-0355 Series 1 Type MTHP Size 2 Two-Piece MAPP/Propylene Cutting Tip is suitable for machine torch and is used to cut metal of thickness 2 - 3 . Tip having a cutting speed of 11/15 10/13 9/11 inches per min features a cutting oxygen pressure... more

Climax Metal Products Shaft Collar Clamp 2Pc 4-1/2 In Steel H2C-450

Shaft Collar System of Measurement Inch Bore Type Round Bore Diameter 4 1/2 in Bore Thread Size Not Applicable Collar Outside Diameter 5 3/4 in Inside Height to Flat Not Applicable Clearance Diameter 5.94 in Collar Width 7/8 in Collar Material Carbon... more

Climax Metal Products Shaft Collar Clamp 2Pc 2-1/4 In Steel 2C-225

Shaft Collar System of Measurement Inch Bore Type Round Bore Diameter 2 1/4 in Bore Thread Size Not Applicable Collar Outside Diameter 3 1/4 in Inside Height to Flat Not Applicable Clearance Diameter 3.5 in Collar Width 3/4 in Collar Material Carbon... more

IEC WM2306 Inside Corner With Base 3/4 inch Ivory

Manufacturer part number: WM2306 to see a diagram of Raceways and Fittings that we carry. Full description: WeightN/AColor Ivory White Size (0.75) 3/4 x (0.5) 1/2 (1.25) 1-1/4 x (0.75) 3/4 (1.75) 1-3/4 x (0.75) 3/4 more

Big Horn 11455 4-Inch ABS Plastic Wall Mounted Blast Gate with Both Quick Disconnect Ends for Dust Collection Systems

Wall mount feature on this Big Horn Blast Gate Dust Collection Fitting provides a large 6-1/2 x 3-1/4 flange with mounting holes to attach the fitting on the wall in either the horizontal or vertical direction. Common blast gate function allows you to... more

INTSUPERMAI Pipe Welding Machine Electric Tube Butt Fusion Equipment 2.48 -6.30 Two Clamps with Timer

Specifications: Model No.: 2.48 -6.30 (63-160mm) two clamps Welding level(Φ mm)outer dia: 2.48 (63mm) 2.95 (75mm) 3.54 (90mm) 4.33 (110mm) 4.92 (125mm) 5.51 (140mm) 6.30 (160mm) Voltage: 110V Power of Heater: 1.2KW Power of Milling Cutter: 0.65 KW... more

Metallic Bronze Square Stickers | 0.5 Inch Square | 1000 Pack

These square stickers can be used for many different reasons. Use these to organize files books products office charts Inventory control warehouse schools and manufacturing plants. The size of these stickers is 1/2 inch square (0.5 x 0.5 ). They are... more

3/16-inch Plastic Welding Rods PE Welder Rod Black 3 Pack

Description 1.PE welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene 2.Mainly made of PE material which is made by high temperature melting and extrusion. The surface... more

3.3ft 3/16-inch Plastic Welding Rods PP Welder Rod White 3 Pack

Description 1.PP welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene which can be used at around 100 degrees. 2.Welding rod with a density of 0.90g/cm3 it is the... more

3.3ft 3/16-inch Plastic Welding Rods PVC Welder Rod Dark Grey 3 Pack

Description 1.PVC welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene 2.Mainly made of PVC material which is made by high temperature melting and extrusion. The surface... more

3.3ft 3/16-inch Plastic Welding Rods PP Welder Rod Red 3 Pack

Description 1.PP welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene which can be used at around 100 degrees. 2.Welding rod with a density of 0.90g/cm3 it is the... more

3.3ft 3/16-inch Plastic Welding Rods PP Welder Rod Clear 6 Pack

Description 1.PP welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene which can be used at around 100 degrees. 2.Welding rod with a density of 0.90g/cm3 it is the... more

3/16-inch Plastic Welding Rods ABS Welder Rod White 5 Pack

Description 1.ABS welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene 2.Mainly made of ABS material which is made by high temperature melting and extrusion. The surface... more

3/16-inch Plastic Welding Rods PE Welder Rod White

Description 1.PE welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene 2.Mainly made of PE material which is made by high temperature melting and extrusion. The surface... more

3.3ft 3/16-inch Plastic Welding Rods PP Welder Rod Yellow 6 Pack

Description 1.PP welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene which can be used at around 100 degrees. 2.Welding rod with a density of 0.90g/cm3 it is the... more

3.3ft 3/16-inch Plastic Welding Rods PVC Welder Rod White 5 Pack

Description 1.PVC welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene 2.Mainly made of PVC material which is made by high temperature melting and extrusion. The surface... more

3.3ft 3/16-inch Plastic Welding Rods PP Welder Rod Yellow 10 Pack

Description 1.PP welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene which can be used at around 100 degrees. 2.Welding rod with a density of 0.90g/cm3 it is the... more

3/16-inch 3.3ft Plastic Welding Rods PVC Welder Rod White

Description 1.PVC welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene 2.Mainly made of PVC material which is made by high temperature melting and extrusion. The surface... more

3.3ft 3/16-inch Plastic Welding Rods ABS Welder Rod Beige 5 Pack

Description 1.ABS welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene 2.Mainly made of ABS material which is made by high temperature melting and extrusion. The surface... more

3/16-inch Plastic Welding Rods PE Welder Rod Black

Description 1.PE welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene 2.Mainly made of PE material which is made by high temperature melting and extrusion. The surface... more

3.3ft 3/16-inch Plastic Welding Rods PP Welder Rod Clear 10 Pack

Description 1.PP welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene which can be used at around 100 degrees. 2.Welding rod with a density of 0.90g/cm3 it is the... more

3/16-inch 3.3ft Plastic Welding Rods PVC Welder Rod Dark Grey

Description 1.PVC welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene 2.Mainly made of PVC material which is made by high temperature melting and extrusion. The surface... more

3/16-inch Plastic Welding Rods ABS Welder Rod Black 3 Pack

Description 1.ABS welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene 2.Mainly made of ABS material which is made by high temperature melting and extrusion. The surface... more

3.3ft 3/16-inch Plastic Welding Rods PVC Welder Rod Grey 5 Pack

Description 1.PVC welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene 2.Mainly made of PVC material which is made by high temperature melting and extrusion. The surface... more

3/16-inch Plastic Welding Rods ABS Welder Rod White 3 Pack

Description 1.ABS welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene 2.Mainly made of ABS material which is made by high temperature melting and extrusion. The surface... more

C-Line Top Loading Heavyweight Poly Sheet Protectors Non-Glare 8.5 x 11 Inches 100 per Box (62028)

The superior durability of the Heavyweight Polypropylene Sheet Protectors make them C-Lines most popular top-loading sheet protectors. Reinforced binding edges make it easy to store frequently-used 8 1/2 X 11 documents safely in binders with no hole... more

3/16-inch Plastic Welding Rods PP Welder Rod Black 3 Pack

Description 1.PP welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene which can be used at around 100 degrees. 2.Welding rod with a density of 0.90g/cm3 it is the... more

3.3ft 3/16-inch Plastic Welding Rods PVC Welder Rod Grey 10 Pack

Description 1.PVC welding rod is tasteless low density and its strength stiffness hardness and heat resistance are better than low-pressure polyethylene 2.Mainly made of PVC material which is made by high temperature melting and extrusion. The surface... more

3.3ft 3/16-inch Plastic Welding Rods PPR Welder Rod Black 3 Pack

Description 1.PPR welding rod is safe tasteless low density high rigidity high hardness 2.fast bonding speed high strength and good welding performance.Used with plastic welding gun 3.Resistant acid alkali and corrosion resistant high frequency... more