Home Hardware › Hot › wooden dowel pins 1 1

Take Control 10 Pcs 1/2 Hot Dip Galvanized Screw Pin Anchor Shackles

Our Anchor Shackles Screw Pins are made of hot dip galvanized steel the anchor shackle is a tough and durable accessory for nylon and polyester slings. This clevis can be used in many applications such as industrial agricultural and marine applications. more

ZORO SELECT 55AY22 Anchor Shackle, Screw Pin, 3/4" Body Size, Finish: Hot

Anchor Shackle, Shackle Type Anchor Shackle, Lifting Capability For Lifting, Working Load Limit 14,000 lb, Compatible Chain Trade Size 3/4 in, Compatible Rope Diameter 3/4 in, Compatible Sling Width 1 1/4 in, Width Between Eyes 1 1/4 in, Body Material... more

Set 6 Black and White Hot Cocoa Farmhouse Cabinet Knobs - 1.5" Wide

These wooden knobs are 1.5" wide and have been painted white with a printed pattern. more

Set of 6 Black and White Hot Cocoa Farmhouse Wood Cabinet Knobs - 1.5" Wide

These wooden knobs are 1.5" wide and have been painted white with a printed pattern. more

Set of 6 Black and White Hot Bath Wood Cabinet Knobs - 1.5" Wide

These wooden knobs are 1.5" wide and have been painted white with a printed pattern. more

Take Control 5 Pcs 1/2 Hot Dip Galvanized Screw Pin Anchor Shackles

Our Anchor Shackles Screw Pins are made of hot dip galvanized steel the anchor shackle is a tough and durable accessory for nylon and polyester slings. This clevis can be used in many applications such as industrial agricultural and marine applications. more

1/4 -20 x 1-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Grade A Full Thread Quantity 100 - by Bilot

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

1/4 -20 x 1-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Grade A Full Thread Quantity 100 - by HElectQRIN

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

Baron 193LR-7/16 Anchor Shackle 7/16 inch Trade 1-1/2 Ton Working Load Steel Hot-Dipped Galvanized

Baron anchor shackle working load limit: 1-1/2 ton trade size: 7/16 inch pin type: screw pin diameter: 1/2 inch steel hot-dipped galvanized more

Hillman 812632 1/2X8 Carriage Bolt 1/2 x 8-Inch Hot-Dipped Galvanized 25

Carriage Bolts are designed to fasten a wooden face to either a wood or metal frame. Its flat head is designed to eliminate the need for a washer and provide a semi-flush finish to applications. The square underside of the head is self locking to... more

6d 1-1/2 Hot Dip Galvanized Steel Joist Flat Head Nails (165 pcs.)

Diameter: 9 gauge Length: 1-1/2 Material: Steel Finish: Hot Dip Galvanized Head Style: Flat Thread Type: Smooth Shank Nominal Size: 6d Style: Joist Type: Nail Box of 165. A nail is a pin-shaped fastener used in engineering woodworking and construction. more

4d 1-1/2 Hot Dip Galvanized Smooth Shank Common Flat Head Nails (320 pcs.)

Diameter: 4 gauge Length: 1-1/2 Material: Steel Finish: Hot Dip Galvanized Head Style: Flat Thread Type: Smooth Shank Nominal Size: 4d Style: Common Type: Nail Box of 320. A nail is a pin-shaped fastener used in engineering woodworking and construction. more

5d 1-1/4 Hot Dip Galvanized Steel Joist Flat Head Nails (190 pcs.)

Diameter: 9 gauge Length: 1-1/4 Material: Steel Finish: Hot Dip Galvanized Head Style: Flat Thread Type: Smooth Shank Nominal Size: 5d Style: Joist Type: Nail Box of 190. A nail is a pin-shaped fastener used in engineering woodworking and construction. more

Hillman 812584 3/8X3-1/2 Carriage Bolt 3/8 x 3-1/2-Inch Hot-Dipped Galvanized 50

Carriage Bolts are designed to fasten a wooden face to either a wood or metal frame. Its flat head is designed to eliminate the need for a washer and provide a semi-flush finish to applications. The square underside of the head is self locking to... more

1/4 -20 x 3-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Grade A Full Thread Quantity 100 - by Bilot

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

1/4 -20 x 2-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Grade A Full Thread Quantity 100 - by Bilot

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

1/4 -20 x 4-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Grade A Full Thread Quantity 100 - by Bilot

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

1/2 -13 x 3-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Quantity 25 - by Bilot

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

1/2 -13 x 2-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Quantity 25 - by Bilot

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

1/2 -13 x 4-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Quantity 25 - by Bilot

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

1/2 -13 x 8-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Quantity 25 - by Bilot

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

1/2 -13 x 6-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Quantity 25 - by Bilot

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

1/4 -20 x 5-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Grade A Full Thread Quantity 100 - by CintBllTer

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

5/16 -18 x 1-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts Full Thread Grade A Quantity 100 - by Bilot

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

5/16 -18 x 1-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Full Thread Grade A Quantity 100 - by Bilot

Carriage bolts are designed to fasten a wooden face to either wood or metal. Push into a hole the same size as the shank and then hammered in the rest of the way where the square shoulder locks it firmly in place eliminating the need for a washer. Used... more

Hillman 812515 Hot Dipped Galvanized Carriage Bolt 1/4 x 2-1/2-Inch Silver 100-Pack

Carriage Bolts are designed to fasten a wooden face to either a wood or metal frame. Its flat head is designed to eliminate the need for a washer and provide a semi-flush finish to applications. The square underside of the head is self locking to... more

Hillman 812638 1/2X12 Carriage Bolt 1/2 x 12-Inch Hot-Dipped Galvanized 25

Carriage Bolts are designed to fasten a wooden face to either a wood or metal frame. Its flat head is designed to eliminate the need for a washer and provide a semi-flush finish to applications. The square underside of the head is self locking to... more

Carriage Bolts and Nuts Hot Dip Galvanized Quantity 100 1/4-20 x 1-3/4

A carriage bolt coach bolt or round head square neck bolt is used through iron strengthening plates on either side of a wooden beam. It is commonplace though to use them on bare timber the squared section giving enough grip to prevent rotation.... more

5 Lb. 1-1/2 Hot-Dipped Galvanized Prime Source Nails 721106 009326705644

5LB HG 1-1/2 STAPLE SKU: 721106 Do it Fence and poultry staples. Hot galvanized staples for exterior use. Corrosion-resistant with sharp points for easy driving. Ideal for securely fastening poultry netting or barbed wire to wooden posts or frames.... more

1017516 G-209A Alloy Pin Anchor Shackle | 5/8 Inch | 5 Ton Working Load Limit | Forged Steel | Hot-Dip Galvanized

Thank you for your custom.Customer care is our top priority. Offer is subject to availability.We promise you won t regret buying it. Width Between Eyes:1 1/16 in Outside Diameter of Eye:1 1/2 in Working Load Limit:10 000 lb more

CM MC651G Screw Pin Carbon Shackle Hot Galvanized 5/8 Bail Size 7165 lbs Load Capacity

Columbus McKinnon MC6651G 5/8 Inch Shackle Anchor Galvanized Forged Anchor Shackles Hot dip galvanized. Orange painted screw pins. Bulk. Attributes: Maximum Load = 3-1/4 ton Size = 5/8 more

Timco - Adjustable Gate Eyes with Nuts - Hot Dipped Galvanised (Size M19 x 200 - 1 Each)

Ideal for use in hanging timber or metal gates and to be used in conjunction with gate hook with matching pin diameter. No fixings required. Hook Plate Size L x W mm - N/A Gate Eye Dia. x L mm - M19 x 200 Pin Dia. mm - N/A Pin Dia. inch - N/A Pin Hole... more

Timco - Adjustable Gate Eyes with Nuts - Hot Dipped Galvanised (Size M16 x 100 - 1 Each)

Ideal for use in hanging timber or metal gates and to be used in conjunction with gate hook with matching pin diameter. No fixings required. Hook Plate Size L x W mm - N/A Gate Eye Dia. x L mm - M16 x 100 Pin Dia. mm - N/A Pin Dia. inch - N/A Pin Hole... more

Timco - Adjustable Gate Eyes with Nuts - Hot Dipped Galvanised (Size M19 x 100 - 1 Each)

Ideal for use in hanging timber or metal gates and to be used in conjunction with gate hook with matching pin diameter. No fixings required. Hook Plate Size L x W mm - N/A Gate Eye Dia. x L mm - M19 x 100 Pin Dia. mm - N/A Pin Dia. inch - N/A Pin Hole... more

Timco - Adjustable Gate Eyes with Nuts - Hot Dipped Galvanised (Size M19 x 150 - 1 Each)

Ideal for use in hanging timber or metal gates and to be used in conjunction with gate hook with matching pin diameter. No fixings required. Hook Plate Size L x W mm - N/A Gate Eye Dia. x L mm - M19 x 150 Pin Dia. mm - N/A Pin Dia. inch - N/A Pin Hole... more

Baron 193LR-5/8 Anchor Shackle 5/8 in Trade 3-1/4 Ton Working Load Steel Hot-Dipped Galvanized

Baron anchor shackle working load limit: 3-1/4 ton trade size: 5/8 in pin type: screw pin diameter: 3/4 in steel hot-dipped galvanized more

(case of 2) Baron 193LR-3/8 Anchor Shackle 3/8 inch Trade 1 Ton Working Load Steel Hot-Dipped Galvanized

Baron anchor shackle working load limit: 1 ton trade size: 3/8 inch pin type: screw pin diameter: 7/16 inch steel hot-dipped galvanized more

Fehr Bros 3/16 Anchor Shackle 3/16 in 1/4 ton Forged Steel Hot Dip Galvanized

Forged steel hot dipped galvanized. Open-throat design wide bow screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F type IV Class 2. Warning Inspect... more