Home Hardware › Prime Line Products › Zinc › hillman 8 x 2 in

Prime-Line 9105770 Hex Head Cap Screws Grade 8 1/2 in.-13 X 3/4 Grade 8 Yellow Zinc Plated Steel 10-Pack

Hex head cap screws are similar to hex bolts but feature a washer surface under the head and have a chamfered end (as opposed to the flat end seen on hex bolts). They are often called finished hex bolts. The 6 sided head makes them easy to install... more

Prime-Line Zinc Hinge Pin Stop 7.8 H x 3.8 W x 1.2 D in brown/gray/whiteMetal in Satin Nickel | 7.8" H X 3.8" W X 1.2" D | Wayfair U 10129-4

Hinge pin door stops install over the door hinge using existing hinge pin. They are used in cases where floor mounted and wall mounted door stops may be found to be unsightly. They can be adjusted to accommodate desired stopping position, which makes... more

Prime-Line Zinc Hinge Pin Stop 7.8 H x 3.8 W x 1.2 D in Metal in Bronze Plated | 7.8" H X 3.8" W X 1.2" D | Wayfair U 10131-4

Hinge pin door stops install over the door hinge using existing hinge pin. They are used in cases where floor mounted and wall mounted door stops may be found to be unsightly. They can be adjusted to accommodate desired stopping position, which makes... more

Prime-Line Spiral Balance Pivot Bar, Used w/ 5/8 in. Spiral Balances, 2.6 H x 3.2 W x 0.4 D in black in Zinc | 2.6" H X 3.2" W X 0.4" D | Wayfair

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator. | Prime-Line Spiral... more

Hex Head Cap Screws Grade 8 1/4 in.-20 X 3-1/2 in. Grade 8 Yellow Zinc Plated Steel 10-Pack

Hex head cap screws are similar to hex bolts but feature a washer surface under the head and have a chamfered end (as opposed to the flat end seen on hex bolts). They are often called finished hex bolts. The 6 sided head makes them easy to install... more

Prime-Line 9056220 Hex Lag Screws 3/8 In. X 2-1/2 In. A307 Grade A Zinc Plated Steel (50 Pack) C31

Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on Phillips head screws though a pilot hole is still... more

Hex Lag Screws 3/8 in. X 2-1/2 in. A307 Grade A Zinc Plated Steel 25-Pack

Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on phillips head screws though a pilot hole is still... more

Prime-Line 9063647 Carriage Bolts 3/8 In.-16 X 2-1/2 In. A307 Grade A Zinc Plated Steel (25 Pack) C31

Carriage bolts feature a slightly rounded head and have no exposed sharp edges when fully fastened. Due to that reason they are often used when a more aesthetic look is desired. They are commonly used on docks and on playground equipment or in cases... more

Prime-Line 9063649 Carriage Bolts 3/8 In.-16 X 2-1/2 In. A307 Grade A Zinc Plated Steel (50 Pack) C31

Carriage bolts feature a slightly rounded head and have no exposed sharp edges when fully fastened. Due to that reason they are often used when a more aesthetic look is desired. They are commonly used on docks and on playground equipment or in cases... more

Prime-Line 9063649 Carriage Bolts 3/8 in.-16 X 2-1/2 in. A307 Grade A Zinc Plated Steel 50-Pack

Carriage bolts feature a slightly rounded head and have no exposed sharp edges when fully fastened. Due to that reason they are often used when a more aesthetic look is desired. They are commonly used on docks and on playground equipment or in cases... more

Carriage Bolts 3/8 in.-16 X 2-1/2 in. A307 Grade A Zinc Plated Steel 25-Pack

Carriage bolts feature a slightly rounded head and have no exposed sharp edges when fully fastened. Due to that reason they are often used when a more aesthetic look is desired. They are commonly used on docks and on playground equipment or in cases... more

Prime-Line 9056220 Hex Lag Screws 3/8 in. X 2-1/2 in. A307 Grade A Zinc Plated Steel 50-Pack

Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on phillips head screws though a pilot hole is still... more

Eye Bolts With Nuts 3/8 in.-16 X 2-1/2 in. Zinc Plated Steel 20-Pack

Eye bolts feature a closed loop on one end which makes them useful for securing wiring rope cable chain and etc. The other end features machine screw threads that allow the bolt to be secured using included hex nuts. It is very important to choose the... more

Prime-Line 9163796 Sheet Metal Screws Self-Tapping Pan Head Square Drive #8 X 1/2 in Zinc Plated Steel 50-Pack

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood it is especially important to pre-drill a hole. more

Prime-Line 9063761 Carriage Bolts 3/8 in.-16 X 3-1/2 in. A307 Grade A Zinc Plated Steel 25-Pack

Carriage bolts feature a slightly rounded head and have no exposed sharp edges when fully fastened. Due to that reason they are often used when a more aesthetic look is desired. They are commonly used on docks and on playground equipment or in cases... more

Prime-Line 9056087 Hex Lag Screws 3/8 In. X 1-1/2 In. A307 Grade A Zinc Plated Steel (100 Pack) C31

Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on Phillips head screws though a pilot hole is still... more

Machine Screws Flat Head Phillips Drive #8-32 X 1/2 in. Zinc Plated Steel 100-Pack

Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. more

Prime-Line 9059866 Hex Bolts 3/8 In.-16 X 3-1/2 In. A307 Grade A Zinc Plated Steel (25 Pack) C31

Hex bolts are one of the most common fasteners and can be used in a wide variety of applications. The 6 sided head makes them easy to install using a standard wrench or socket tool. Nuts and washers are not included so will need to be purchased... more

Prime-Line 9060075 Hex Bolts 3/8 in.-16 X 5-1/2 in. A307 Grade A Zinc Plated Steel 15-Pack

Hex bolts are one of the most common fasteners and can be used in a wide variety of applications. The 6 sided head makes them easy to install using a standard wrench or socket tool. Nuts and washers are not included so will need to be purchased... more

Prime-Line 9019966 Sheet Metal Screws Self-Tapping Pan Head Phillips Drive #8 X 2 in. Zinc Plated Steel 50-Pack

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood it is especially important to pre-drill a hole. more

Prime-Line 9059695 Hex Bolts 3/8 in.-16 X 2 in. A307 Grade A Zinc Plated Steel 25-Pack

Hex bolts are one of the most common fasteners and can be used in a wide variety of applications. The 6 sided head makes them easy to install using a standard wrench or socket tool. Nuts and washers are not included so will need to be purchased... more

Prime-Line 9154657 Sheet Metal Screws Self-Tapping Pan Head Phillips Drive #8 X 1/2 in Zinc Plated Steel With Black Head 25-Pack

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood it is especially important to pre-drill a hole. more

Prime-Line 9035415 Wood Screws Flat Head Phillips Drive #8 X 3-1/2 in. Zinc Plated Steel 50-Pack

Wood screws are used to attach two pieces of wood together and they feature a pointed tip that helps drive into wood. Pilot holes are sometimes needed to avoid splitting the wood. more

Prime-Line 9104174 Hex Head Cap Screws Grade 5 5/8 in.-18 X 2 in. Grade 5 Zinc Plated Steel 5-Pack

Hex head cap screws are similar to hex bolts but feature a washer surface under the head and have a chamfered end (as opposed to the flat end seen on hex bolts). They are often called finished hex bolts. The 6 sided head makes them easy to install... more

Prime-Line 9056334 Hex Lag Screws 3/8 in. X 3-1/2 in. A307 Grade A Zinc Plated Steel 50-Pack

Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on phillips head screws though a pilot hole is still... more

Prime-Line 9080139 Flat Washers USS 1/2 in. X 1-3/8 in. OD Zinc Plated Steel 50-Pack

Flat washers are the most widely used types of general purpose washers and are most often paired with standard bolts and hex nuts. They distribute the force from the bolt head & nut over a larger area which serves to protect the surface of the material... more

Prime-Line 9060949 Hex Bolts 1/2 in.-13 X 8 in. A307 Grade A Zinc Plated Steel 10-Pack

Hex bolts are one of the most common fasteners and can be used in a wide variety of applications. The 6 sided head makes them easy to install using a standard wrench or socket tool. Nuts and washers are not included so will need to be purchased... more

Prime-Line 9063592 Carriage Bolts 3/8 in.-16 X 2 in. A307 Grade A Zinc Plated Steel 50-Pack

Carriage bolts feature a slightly rounded head and have no exposed sharp edges when fully fastened. Due to that reason they are often used when a more aesthetic look is desired. They are commonly used on docks and on playground equipment or in cases... more

Prime-Line 9081469 Fender Washers 3/8 in. X 1-1/2 in. OD Zinc Plated Steel 25-Pack

Fender washers have a larger outside diameter than standard washers allowing the load to be spread over a larger area. This allows it to be used on softer metals. They are most often used in the automotive and other sheet metal industries. more

Prime-Line 9035299 Wood Screws Flat Head Phillips Drive #8 X 2 in. Zinc Plated Steel 75-Pack

Wood screws are used to attach two pieces of wood together and they feature a pointed tip that helps drive into wood. Pilot holes are sometimes needed to avoid splitting the wood. more

Sheet Metal Screws Self-Tapping Hex Washer Head Slotted Drive #8 X 1-1/2 in Zinc Plated Steel 50-Pack

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood it is especially important to pre-drill a hole. more

Machine Screws Flat Head Phillips Drive #8-32 X 1/2 in. Zinc Plated Steel 75-Pack

Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. more

Prime-Line 9032373 Sheet Metal Screws Self-Drilling Indented Hex Washer Head #10 X 5/8 in. Zinc Plated Case Hardened Steel 75-Pack

The threads on sheet metal screws are designed to pull two materials tightly together. The self drilling tip eliminates the need to drill a pilot hole. more

Prime-Line 9032392 Sheet Metal Screws Self-Drilling Indented Hex Washer Head #10 X 5/8 in. Zinc Plated Case Hardened Steel 100-Pack

The threads on sheet metal screws are designed to pull two materials tightly together. The self drilling tip eliminates the need to drill a pilot hole. more

Prime-Line 9032126 Sheet Metal Screws Self-Drilling Indented Hex Washer Head #8 X 3/4 in. Zinc Plated Case Hardened Steel 75-Pack

The threads on sheet metal screws are designed to pull two materials tightly together. The self drilling tip eliminates the need to drill a pilot hole. more

Prime-Line 9029675 Sheet Metal Screws Self-Drilling Pan Head Phillips Drive #8 X 3/4 in. Zinc Plated Case Hardened Steel 75-Pack

The threads on sheet metal screws are designed to pull two materials tightly together. The self drilling tip eliminates the need to drill a pilot hole. more

Prime-Line 9034640 Wood Screws Flat Head Phillips Drive #6 X 7/8 in Zinc Plated Steel 50-Pack

Wood screws are used to attach two pieces of wood together and they feature a pointed tip that helps drive into wood. Pilot holes are sometimes needed to avoid splitting the wood. more

Sheet Metal Screws Self-Tapping Pan Head Phillips Drive #8 X 1 in. Zinc Plated Steel 100-Pack

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood it is especially important to pre-drill a hole. more