You're in Home Hardware
See Matches in:
Narrow Search Results
Price Range
By Brand
- Prime Line Products remove
By Seller
By Material
By Home Hardware Types
- Brackets
- Garage Door Openers
- Handles
- Hinges
- Knobs
- Sliding Doors
- Support Pegs
- Window Hardware
- more...
By Home Hardware Features
By Keyword
Best Seller | Use this Prime-Line H 3958 Pella Spline Socket Casement Window Handle with Pella casement operators that have 3/8 inch diameter splines. It fits other, similar-styled casement operators with 3/8 inch special deep splines and features a long-reaching... more | go to store |
These pivot hinge pins are constructed of steel and come in a zinc-plated finish. They feature a male 5/16"-18 threaded end on one side and a slotted end on the other. This pivot hinge pin has a 3/8 inch outside diameter and measures 3-1/4 inches in... more | go to store |
Use this Prime-Line H 3958 Pella Spline Socket Casement Window Handle with Pella casement operators that have 3/8 inch diameter splines. It fits other, similar-styled casement operators with 3/8 inch special deep splines and features a long-reaching... more | go to store |
These standard latch strikes are constructed of steel and come in a antique brass plated finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners... more | go to store |
This chain door guard is constructed of extruded brass and comes in a chrome-plated finish. It features a 6 in. long, 8-link welded steel chain and all installation fasteners necessary for complete install. When this chain door guard is fully assembled... more | go to store |
These standard latch strikes are constructed of steel and come in a brass plated finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners included with... more | go to store |
This decorative door knocker and viewer is constructed of diecast materials and comes in a satin nickel finish. Its vintage design extends a total of 4 inch tall and features a 160 degree angle of view. This door knocker and viewer can be installed on... more | $28.85 $19.54 go to store |
These pilaster support brackets are constructed of stainless steel and come in a satin finish. This model features a 2-ear top bracket (U-shaped) that will hold a pilaster or partition panel of up to 1-1/4 inches thick. Partition supports of this size... more | FREE shipping go to store |
This is a solid brass door reinforcer in a classic bronze finish. Helps prevent a forced entry. Typically used on wood or metal doors that are 1-3/8 in. thick with mortise or drive-in latches. Accommodates key-in knob locksets or deadbolts, or... more | go to store |
This is a solid brass door reinforcer in a classic bronze finish. Helps prevent a forced entry. Typically used on wood or metal doors that are 1-3/8 in. thick with mortise or drive-in latches. Accommodates key-in knob locksets or deadbolts, or... more | go to store |
This is a heavy-duty pneumatic storm door closer for heavy weight wood or aluminum outswinging doors. It has a 1-1/2 in. barrel that is 10-3/8 in. long in an aluminum finish. It comes complete with mounting brackets and attaching hardware. It has... more | go to store |
These pilaster shoe kits are constructed of an 18 gauge steel anchor bracket and a 22 gauge, satin-finished stainless steel pilaster shoe. They feature a 3-inch tall reach and square ends. Each bracket is slotted at the horizontal base, on each end for... more | go to store |
Designed for use with a concealed latching mechanism, it has an offset bolt with a flat tip, and it assembles easily with a push nut fastener. This lever set has a 1-3/4 in. outside diameter, and it features an overall reach of 2-21/32 inches with a... more | go to store |
This tulip knob latch is designed for outswinging wood or metal screen or storm doors that are 5/8 in. to 1-1/4 in. thick. It has a white finish and comes complete with a night lock for security. It has mounting holes that are 1-3/4 in. on center. They... more | go to store |
These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... more | go to store |
This tulip knob latch is designed for outswinging wood or metal screen or storm doors that are 5/8 in. to 1-1/4 in. thick. It has a white finish and comes complete with a night lock for security. It has mounting holes that are 1-3/4 in. on center. They... more | go to store |
These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... more | go to store |
This is a heavy-duty pneumatic storm door closer for heavy weight wood or aluminum outswinging doors. It has a 1-1/2 in. barrel that is 10-3/8 in. long in an aluminum finish. It comes complete with mounting brackets and attaching hardware. It has... more | go to store |
This is a sliding window secondary bolt lock designed to mount on most dual glazed sliding windows for added security. Features a narrow body white plastic housing with steel bolt has a 7/8 in. throw. Works on both horizontal and vertical sliders. |... more | go to store |
These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a... more | go to store |
This tulip knob latch is designed for outswinging wood or metal screen or storm doors that are 5/8 in. to 1-1/4 in. thick. It has a white finish and comes complete with a night lock for security. It has mounting holes that are 1-3/4 in. on center. They... more | go to store |
Feature a 3-inch tall reach and oval ends. Anchor brackets are sold separately for pilaster shoe installation. | Prime-Line Pilaster Shoe, Fits 7in Pilasters, Construction, Oval End (Single Pack) in Gray | 1.38 H x 6 W x 9 D in | Wayfair more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-1/8 in. tall with a 13/16 in. flare. It is rear adjusting with a 1/4-20 threaded mounting hole on... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide, with a 7/8 in. flare, and is 1-9/16 in. tall. Features a rear adjusting threaded mounting hole on the back... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... more | go to store |
This is a unique back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a unique back housing made of extruded aluminum. The housing is 7/8 in. 1-3/16 in. tall and 2-1/16 in. long. This style of unique... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball-bearing roller. It has a plain back housing that is 3/4 in. wide and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... more | go to store |
This is a plain back, patio door roller assembly with a 1-1/2 in. concave, or grooved, steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 13/16 in. dimple width, and 1-5/8 in. tall. It is rear adjusting with a 1/4-20... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide, 1-1/4 in. tall and 2-3/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting... more | go to store |
This headrail bracket is constructed of stamped stainless steel and comes in a satin finish. These brackets are designed for use with 1-1/8 inch thick panels, and they are commonly used to replace broken or missing wall brackets. This mini bracket is... more | go to store |
This is a non-handed casement locking handle in a white finish with mounting holes 2-3/8 inch on center. This is a universal design and the handle is made of a diecast construction with the handle hanging straight down and used by a variety of aluminum... more | go to store |
This headrail bracket is constructed of stamped stainless steel and comes in a satin finish. These wide brackets are designed for use with 3/4 inch thick panels, and they are commonly used to replace broken, or missing wall brackets. | Prime-Line... more | go to store |
This is a non-handed casement locking handle in a white finish with mounting holes 2-3/8 inch on center. This is a universal design and the handle is made of a diecast construction with the handle hanging straight down and used by a variety of aluminum... more | go to store |
This mini headrail bracket is constructed of stamped stainless steel and comes in a satin finish. These brackets are designed for use with 1-1/8 inch thick panels, and they are commonly used to replace broken or missing wall brackets. | Prime-Line Mini... more | go to store |
This is a non-handed casement locking handle in a white finish with mounting holes 2-3/8 inch on center. This is a universal design and the handle is made of a diecast construction with the handle hanging straight down and used by a variety of aluminum... more | go to store |
These pivot hinge pins are constructed of plastic and come white in color. They feature a knurled (grooved) and female 1/4-20 threaded end on one side, and a chamfered end on the other. This pivot hinge pin has a 3/8 inch outside diameter and measures... more | go to store |
This is a non-handed patio door handle constructed from diecast metal in a white finish. It is a common and popular design that fits most doors with a cutout for a flush handle set. The mounting holes are 6-5/8 in. on center. They feature inside and... more | go to store |
This is a C-tab tandem roller assembly with two 1-1/8 inch steel ball-bearing rollers. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 11/16... more | go to store |
Ads related to 6 pack of 8 inch