Home Hardware › Hillman › Steel › 10 x 3 4

Hillman Hardware Essentials 320852 U-Bolt Saddle Steel Zinc 5/16 x 3 x 1-3/4

FEATURES: Hillman Hardware Essentials U-Bolt Round Saddle Zinc (5/16 x 3 x 1-3/4 ) are great for piping projects. Traditionally used for wire cable piping and much more. Also available in several sizes. U-bolt measurements are as follows diameter x... more

Hillman 160514 Zinc-Plated 5-Grade Steel Coarse Thread USS Hex Nut 3/4 in.-10

Hex nuts are to be used with machine bolts to adhere facing materials to prevent tension and shear movement. Specifically in wood to wood wood to metal or metal to metal applications. Zinc grade 5 steel hex nuts are recommended for most outdoor... more

Hillman No. 4 x 3/4 in. L Phillips Flat Head Zinc-Plated Steel Wood Screws 100 pk

Sold as 6 UNITS at $3.75 per unit. 1 unit = Bx/100. Phillips. Flat head. Box/100. No. 4 x 3/4 inches. Manufacturer number: 40004. SKU #: 56140. Country of origin: Taiwan. Distributed by Hillman Group Rsc. more

HILLMAN No. 1/4-20 in. X 3/4 in. L Slotted Round Head Zinc-Plated Steel Machine Screws 6 pk

Fasten metal parts together using the Hillman 1/4 -20 Machine Screw with Nut. It has a slotted round head. This Hillman 1/4 -20 Machine Screw with Nut is made from steel and is plated with zinc for durability. more

Hillman Hammer Drive Anchor 1/2 X 4-3/4 Zinc Plated Steel

Hillman 1/2 in. Dia. x 4-3/4 in. L Steel Round Head Strike Anchor 1 pk more

Hillman Pan Head Phillips Machine Screw 1/4-20 x 3/4 Zinc Steel 7 Sets

Hillman Coarse Machine Screws are fastening screws with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines tools... more

Hillman No. 1/4-20 in. x 3/4 in. L Phillips Flat Head Zinc-Plated Steel Machine Screws 100 pk

Machine screws are used with nuts or screwed directly into a threaded socket to hold metal parts together. Measure from the bottom of the head to the tip of the screw to get Fastener Length. If nuts are needed use nuts with the same finish and tap for... more

Hillman 80007 Zinc-Plated Steel Phillips Pan Head Sheet Metal Screw #4 x 3/4 in.

Sheet metal screws or tapping screws are highly versatile. Though they are designed to attach metal to metal they re also used to attach metal to wood fiberglass and plastic. Great for general repair around the house their sharp threads draw materials... more

Hillman 1/4 in. D X 1-3/4 in. L Steel Round Head Strike Anchor 50 pk

Strike Anchors are designed for concrete applications only. For installation anchor is inserted into pilot hole nail is struck and expands the anchor locking it in place. These anchors are removable with a claw hammer. null - more

Power Pro 1/4 in. D X 1-3/4 in. L Carbon Steel Hex Head Concrete Screw Anchor 18 pc

Power Pro Concrete Screw Anchors are the best-performing code-approved anchors for fastening into concrete and masonry. Brand Name: HILLMAN Diameter: 1/4 in. Length: 1-3/4 in. Material: Carbon Steel Head Style: Hex Head Product Type: Concrete Screw... more

Hillman 881120 1/4 in. x 1-3/4 in. Steel Cotter Pin 2-Pack

Product Details The Hillman 1/4 in. x 1-3/4 in. Steel Cotter Pin is used to secure two items together with the use of a common hole. Place the cotter pin in the hole. The bulbous head stops the pin from moving all the way through. To secure in place... more

Hillman Wedge Anchor 1/4 X 3-1/4 Zinc Plated Steel

Introducing the Hillman Wedge Anchor a durable and versatile fastening solution engineered to securely anchor objects to concrete brick or block surfaces. Crafted with precision and reliability by Hillman a trusted leader in hardware solutions this... more

Hillman 370929 Steel Zinc Power-Stud+ SD1 Anchors 3/8 x 2-3/4 1-Pack

FEATURES: Power-Stud+ SD1 Anchors are fully threaded torque-controlled wedge expansion anchors designed for concrete applications. Zinc plating offers moderate protection against rust and corrosion Suitable for use in solid concrete and grout-filled... more

Power Pro 3/16 in. D X 1-3/4 in. L Carbon Steel Flat Head Concrete Screw Anchor 25 pc

Power Pro Concrete Screw Anchors are the best performing code approved anchors for fastening into concrete and masonry. Brand Name: HILLMAN Diameter: 3/16 in. Length: 1-3/4 in. Material: Carbon Steel Head Style: Flat Head Product Type: Concrete Screw... more

Hillman Lag Screws 1/4 x 3 Zinc Plated Steel Pack of 3 New

Manufactured to be extremely sturdy lag screws are some of the toughest fasteners. These zinc plated steel Hex Lag Screws provide adequate corrosion and rust protection making it a good choice for outdoor projects. Use this lag screw to attach objects... more

Hillman 881104 1/16 in. x 3/4 in. Steel Cotter Pin 3-Pack

Product Details The Hillman 1/16 in. x 3/4 in. Steel Cotter Pin is used to secure two items together with the use of a common hole. Place the cotter pin in the hole. The bulbous head stops the pin from moving all the way through. To secure in place... more

Hillman 880329 Steel Socket-Head Cap Screw Black 3/8 in.-16 x 3/4 in. 2-Pack

FEATURES: The Hillman Socket-head Cap Screw carries a recessed internal socket drive to add strength. The socket head cap screw is commonly used on machine parts manufacturing equipment and other mechanical applications. The socket head screw will get... more

Hillman Wedge Anchor 1/2 X 3-3/4 Zinc Plated Steel

Hillman Wedge Anchor a robust and dependable fastening solution meticulously engineered to securely anchor objects to concrete brick or block surfaces. Crafted with precision and durability by Hillman a trusted leader in hardware solutions this wedge... more

Hillman Fender Washers 3/16 x 3/4 Zinc Plated Steel Pack of 8

The Hillman Steel Zinc-plated Fender Washers are flat washers with a thinner body and an increased outer diameter. They are chosen when a large outer diameter is needed for an increased bearing surface and surface load reduction. The wider... more

Hillman Wedge Anchor 1/2 X 3-3/4 Zinc Plated Steel

Hillman 1/2 in. Dia. x 3-3/4 in. L Steel Round Head Wedge Anchor 12 pk more

Hillman 370939 Steel Zinc Power-Stud+ SD1 Anchors 1/2 x 3-3/4 1-Pack

FEATURES: Power-Stud+ SD1 Anchors are fully threaded torque-controlled wedge expansion anchors designed for concrete applications. Zinc plating offers moderate protection against rust and corrosion Suitable for use in solid concrete and grout-filled... more

Hillman 1/2 in. Dia. x 3-3/4 in. L Steel Round Head Wedge Anchor 12 pk

Hillman Wedge Anchor 1/2 X 3-3/4 Zinc Plated Steel more

Hillman Hardware Essentials 852443 Steel Zinc Flagged-U-Bolt 3/8 X 4 X 2-1/2

FEATURES: Hillman Hardware Essentials U-bolts are great for piping projects. U-bolts are available in stainless steel and zinc finishes. Traditionally used for wire cable piping and much more. Also available in several sizes. U-bolt measurements are as... more

Hillman Hardware Essentials 320836 Steel Zinc Flagged U-Bolt 1/4 X 3-1/2 X 2

FEATURES: Hillman Hardware Essentials U-bolts are great for piping projects. U-bolts are available in stainless steel and zinc finishes. Traditionally used for wire cable piping and much more. Also available in several sizes. U-bolt measurements are as... more

HILLMAN No. 8-32 in. X 1-1/4 in. L Slotted Round Head Zinc-Plated Steel Machine Screws 10 pk

Machine screws are used with nuts or directly into a threaded receptacle to fasten metal parts together. Measured from the underside of the head to the tip of the screw to obtain fastener length. If nuts are needed use with nuts of the same finish and... more

Hillman Fasteners 560334 Zinc Plated Steel Drilling Screws #10 X 1-1/4

Hex washer head sheet metal screws. Self-drilling points that drill tap and fasten in 1 operation. Good for attaching almost any type of material to metal. Sharp threads create their own mating thread when drilled into the material. Zinc. 100-piece... more

Hillman No. 10-24 in. x 1-1/4 in. L Combination Round Head Zinc-Plated Steel Machine Screws 100 pk

Phillips/Slotted combination. Round head. Box/100. No.10-24x1-1/4 . Manufacturer number: 90245. SKU #: 56321. Distributed by Hillman Group Rsc. more

Hillman 1/2 in. D X 4 in. L Steel Hex Head Sleeve Anchors 10 pk

Concrete Sleeve Anchors design allows them to anchor into concrete brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve expanding and anchoring itself securely in the base material. Sleeve anchors have many... more

Hillman No. 10-32 in. x 1-1/4 in. L Combination Round Head Zinc-Plated Steel Machine Screws 100 pk

Sold as 4 UNITS at $6.05 per unit. 1 unit = Bx/100. Phillips/Slotted combination. Round head. Box/100. No.10-32x1-1/4 . Manufacturer number: 90308. SKU #: 77141. Country of origin: China. Distributed by Hillman Group Rsc. more

Hillman 371956 0.75 x 4.75 in. Zinc-Plated Steel Wedge Anchor Box of 10

Power Fasteners Power Stud anchor . Steel/zinc-plated. For use in concrete stone brick and block. Ideal for medium to heavy-duty loads. Drill hole same diameter as anchor. Exact hole depth is not required. more

Hillman 1/2 in. D X 4-1/2 in. L Steel Round Head Wedge Anchor 10 pk

Power Fasteners Power Stud anchor . Steel/zinc-plated. For use in concrete stone brick and block. Ideal for medium to heavy-duty loads. Drill hole same diameter as anchor. Exact hole depth is not required. more

Hillman 40143 10 x 4 in. Phillip Flat Head Zinc Plated Steel Wood Screws

Zinc Wood Screws are designed to join two pieces of wood. The smooth shank allows the screw to pull two pieces of wood together for a tight join while preventing the wood from pulling or splitting. The standard point on these screws requires a pilot... more

Hillman 10-24 x 4 Toggle Bolt Round Phillips Head Steel 2-Pak H-06-8227-161

10-24 x 4 Toggle Bolt Round Phillips head Steel 2-Pak Hillman more

Hillman 5/8 in. D X 4 in. L Steel Round Head Strike Anchor 10 pk

Strike Anchors are designed for concrete applications only. For installation anchor is inserted into pilot hole nail is struck and expands the anchor locking it in place. These anchors are removable with a claw hammer. * Brand Name: HILLMAN Diameter:... more

Hillman No. 10 x 1-1/4 in. L Phillips Flat Head Zinc-Plated Steel Wood Screws 100 pk

A wood forming thread is a sharp threaded thread at a coarse pitch. It is used for directly fastening two wooden surfaces. Wood screws have a smooth shank that allows the screw to pull the two pieces of wood together for a joint to prevent the wood... more

Hillman Drywall Screws No. 6 X 1-1/4 Black Phosphate Coated Phillips Fine Steel Pack of 10

Fine-thread drywall screws have been made specifically to combine drywall to either a wood or metal. A number 2 Phillips head makes the driving of this screw easily ready and the sharp tip screw is great for piercing wood. * Brand Name: HILLMAN Callout... more

Hillman 371956 0.75 x 4.75 in. Zinc-Plated Steel Wedge Anchor Box of 10

Features: Raw drill bit size drill bit diameter. Min imbed 14118 38 134 12 214 58 27834 338. Zinc plated steel. In box. 34 x 434. Box of 10 specifications. Dimensions: 28 x 42 x 59L. Weight: 78 lbs. more

HILLMAN No. 10-32 in. X 1-1/4 in. L Slotted Round Head Zinc-Plated Steel Machine Screws 8 pk

Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together. Measured from the underside of the head to the tip of the screw to obtain fastener length. If nuts are needed use with nuts of the same... more