You're in Hunting & Archery Equipment
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
| Best Seller  | Brownells Carbide Center Drill - #4 Carbide Center Drill 1/8" If none of the common methods for removing a frozen screw work, and drilling is in order, these carbide center drills should be used to center and "start" the hole. With the spindle at fairly high speed, bring the center drill down to the screw head... ... more
Brownells Carbide Center Drill - #4 Carbide Center Drill 1/8" If none of the common methods for removing a frozen screw work, and drilling is in order, these carbide center drills should be used to center and "start" the hole. With the spindle at fairly high speed, bring the center drill down to the screw head... | go to store |
 | Brownells Carbide Center Drill - #2 Carbide Center Drill 5/64" If none of the common methods for removing a frozen screw work, and drilling is in order, these carbide center drills should be used to center and "start" the hole. With the spindle at fairly high speed, bring the center drill down to the screw head... ... more
Brownells Carbide Center Drill - #2 Carbide Center Drill 5/64" If none of the common methods for removing a frozen screw work, and drilling is in order, these carbide center drills should be used to center and "start" the hole. With the spindle at fairly high speed, bring the center drill down to the screw head... | go to store |
| Best Seller  | Brownells Carbide Center Drill - #3 Carbide Center Drill 7/64" If none of the common methods for removing a frozen screw work, and drilling is in order, these carbide center drills should be used to center and "start" the hole. With the spindle at fairly high speed, bring the center drill down to the screw head... ... more
Brownells Carbide Center Drill - #3 Carbide Center Drill 7/64" If none of the common methods for removing a frozen screw work, and drilling is in order, these carbide center drills should be used to center and "start" the hole. With the spindle at fairly high speed, bring the center drill down to the screw head... | go to store |
 | Brownells High Speed Countersink - Countersink #1 - 3/64" Drill Diameter 1/8" Body Diameter 60� High speed steel countersinks. Mfg: Brownells SPECS: 60� High speed steel. ... more
Brownells High Speed Countersink - Countersink #1 - 3/64" Drill Diameter 1/8" Body Diameter 60� High speed steel countersinks. Mfg: Brownells SPECS: 60� High speed steel. | go to store |
 | Brownells Solid Carbide Drill - #28 Solid Carbide Drill Specially ground, single-flute, solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). Cuts a clean chip in hardest file steel, giving true hole. Does not "crumble out" the steel; thus, no... ... more
Brownells Solid Carbide Drill - #28 Solid Carbide Drill Specially ground, single-flute, solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). Cuts a clean chip in hardest file steel, giving true hole. Does not "crumble out" the steel; thus, no... | go to store |
 | Brownells Solid Carbide Drill - #31 Solid Carbide Drill Specially ground, single-flute, solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). Cuts a clean chip in hardest file steel, giving true hole. Does not "crumble out" the steel; thus, no... ... more
Brownells Solid Carbide Drill - #31 Solid Carbide Drill Specially ground, single-flute, solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). Cuts a clean chip in hardest file steel, giving true hole. Does not "crumble out" the steel; thus, no... | go to store |
 | Brownells Solid Carbide Drill - #29 Solid Carbide Drill Specially ground, single-flute, solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). Cuts a clean chip in hardest file steel, giving true hole. Does not "crumble out" the steel; thus, no... ... more
Brownells Solid Carbide Drill - #29 Solid Carbide Drill Specially ground, single-flute, solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). Cuts a clean chip in hardest file steel, giving true hole. Does not "crumble out" the steel; thus, no... | $21.99 $18.99 go to store |
 | Brownells Solid Carbide Center-Cut End Mill Cutters - 1/4" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... ... more
Brownells Solid Carbide Center-Cut End Mill Cutters - 1/4" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... | go to store |
 | Brownells Solid Carbide Center-Cut End Mill Cutters - 1/2" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... ... more
Brownells Solid Carbide Center-Cut End Mill Cutters - 1/2" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... | go to store |
 | Brownells Solid Carbide Center-Cut End Mill Cutters - 3/8" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... ... more
Brownells Solid Carbide Center-Cut End Mill Cutters - 3/8" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... | go to store |
 | Brownells Solid Carbide Center-Cut End Mill Cutters - 5/16" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... ... more
Brownells Solid Carbide Center-Cut End Mill Cutters - 5/16" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... | go to store |
 | Brownells Solid Carbide Center-Cut End Mill Cutters - 7/16" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... ... more
Brownells Solid Carbide Center-Cut End Mill Cutters - 7/16" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... | go to store |
 | Brownells Solid Carbide Ball End Mills - 1/4" Carbide Ball End Mill Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turning equipment. Single-ended. Premium, high feed rate carbide for hardened steels. Mfg:... ... more
Brownells Solid Carbide Ball End Mills - 1/4" Carbide Ball End Mill Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turning equipment. Single-ended. Premium, high feed rate carbide for hardened steels. Mfg:... | go to store |
 | Brownells Tin Coated Drill - 1/4" Drill TiN COATED DRILL Mfg: Brownells SPECS: Jobber length. ... more
| go to store |
 | Brownells Solid Carbide Ball End Mills - 5/16" Carbide Ball End Mill Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turning equipment. Single-ended. Premium, high feed rate carbide for hardened steels. Mfg:... ... more
Brownells Solid Carbide Ball End Mills - 5/16" Carbide Ball End Mill Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turning equipment. Single-ended. Premium, high feed rate carbide for hardened steels. Mfg:... | go to store |
 | Brownells Hole Center Punches - #10 Hole Center Punch 3 special Center Punches with outside diameters (O.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and... ... more
Brownells Hole Center Punches - #10 Hole Center Punch 3 special Center Punches with outside diameters (O.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and... | go to store |
 | Brownells Solid Carbide End Mills - 1/8" (3.17mm) Dia. 1.5" (3.8cm) Overall The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (Cut most of slot with mill, finish with dovetail cutter.) Gives extended tool life when used in softer metals. 3/16" diameter is... ... more
Brownells Solid Carbide End Mills - 1/8" (3.17mm) Dia. 1.5" (3.8cm) Overall The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (Cut most of slot with mill, finish with dovetail cutter.) Gives extended tool life when used in softer metals. 3/16" diameter is... | go to store |
 | Brownells Solid Carbide End Mills - 1/4" (6.35mm) Dia. 2.5" (6.3cm) Overall The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (Cut most of slot with mill, finish with dovetail cutter.) Gives extended tool life when used in softer metals. 3/16" diameter is... ... more
Brownells Solid Carbide End Mills - 1/4" (6.35mm) Dia. 2.5" (6.3cm) Overall The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (Cut most of slot with mill, finish with dovetail cutter.) Gives extended tool life when used in softer metals. 3/16" diameter is... | go to store |
 | Brownells High Speed Countersink - Countersink #3 - 7/64" Drill Diameter 1/4" Body Diameter 60� High speed steel countersinks. Mfg: Brownells SPECS: 60� High speed steel. ... more
Brownells High Speed Countersink - Countersink #3 - 7/64" Drill Diameter 1/4" Body Diameter 60� High speed steel countersinks. Mfg: Brownells SPECS: 60� High speed steel. | go to store |
 | Brownells Carbide Sight Insert Cutter WeX'Xve had many requests for a small dovetail cutter that would speed up the cutting of dovetails in front sight blades when installing colored inserts. The one weX'Xve had made cuts a 1⁄4" wide dovetail, just right for sight inserts, and the finished... ... more
Brownells Carbide Sight Insert Cutter WeX'Xve had many requests for a small dovetail cutter that would speed up the cutting of dovetails in front sight blades when installing colored inserts. The one weX'Xve had made cuts a 1⁄4" wide dovetail, just right for sight inserts, and the finished... | $51.99 $39.99 go to store |
 | Brownells Drill Chuckable Shotgun Cleaning Rod One-piece, brass cleaning rod has a 1⁄4" hex that lets you drive it with your hand drill to power scrub the toughest lead and plastic fouling without damage to the bore. 5⁄16"-27 female thread accepts standard shotgun accessories. We like to wrap some... ... more
Brownells Drill Chuckable Shotgun Cleaning Rod One-piece, brass cleaning rod has a 1⁄4" hex that lets you drive it with your hand drill to power scrub the toughest lead and plastic fouling without damage to the bore. 5⁄16"-27 female thread accepts standard shotgun accessories. We like to wrap some... | go to store |
 | Brownells Lathe Centering Bar - Lathe Centering Bar 1-1/4"x24" Steel bar lets you set up and check the trueness of your lathe. Accurately confirms the alignment of centers and helps precisely offset the tailstock for cutting tapers. Recesses on each end align headstock and tailstock centers to prevent taper cuts.... ... more
Brownells Lathe Centering Bar - Lathe Centering Bar 1-1/4"x24" Steel bar lets you set up and check the trueness of your lathe. Accurately confirms the alignment of centers and helps precisely offset the tailstock for cutting tapers. Recesses on each end align headstock and tailstock centers to prevent taper cuts.... | go to store |
 | Brownells Power Custom Brass Muzzle Crowning Lap - Non-Handled Fits Bore .38/.357-.41 Tip Radius 1/4 Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill. Mfg: Brownells SPECS: Brass. 3" (7.62cm) long. Sets include (4) laps, one of... ... more
Brownells Power Custom Brass Muzzle Crowning Lap - Non-Handled Fits Bore .38/.357-.41 Tip Radius 1/4 Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill. Mfg: Brownells SPECS: Brass. 3" (7.62cm) long. Sets include (4) laps, one of... | go to store |
 | Brownells Bolt Lapping Tools - One Gun Bolt Lapping Set Fits Winchester 70 Spring-loaded tool gives constant, straight-back pressure to keep bolt lugs square against the receiver while lapping with 600 to 800 grit, silicon carbide abrasive. Provides better results than mere thumb pressure. Interchangeable threaded sleeves fit... ... more
Brownells Bolt Lapping Tools - One Gun Bolt Lapping Set Fits Winchester 70 Spring-loaded tool gives constant, straight-back pressure to keep bolt lugs square against the receiver while lapping with 600 to 800 grit, silicon carbide abrasive. Provides better results than mere thumb pressure. Interchangeable threaded sleeves fit... | go to store |
 | Brownells Bolt Lapping Tools - M1a/M14 1-Gun Bolt Lapping Set Spring-loaded tool gives constant, straight-back pressure to keep bolt lugs square against the receiver while lapping with 600 to 800 grit, silicon carbide abrasive. Provides better results than mere thumb pressure. Interchangeable threaded sleeves fit... ... more
Brownells Bolt Lapping Tools - M1a/M14 1-Gun Bolt Lapping Set Spring-loaded tool gives constant, straight-back pressure to keep bolt lugs square against the receiver while lapping with 600 to 800 grit, silicon carbide abrasive. Provides better results than mere thumb pressure. Interchangeable threaded sleeves fit... | go to store |
 | Brownells Bolt Lapping Tools - One Gun Bolt Lapping Set Fits Savage Large Spring-loaded tool gives constant, straight-back pressure to keep bolt lugs square against the receiver while lapping with 600 to 800 grit, silicon carbide abrasive. Provides better results than mere thumb pressure. Interchangeable threaded sleeves fit... ... more
Brownells Bolt Lapping Tools - One Gun Bolt Lapping Set Fits Savage Large Spring-loaded tool gives constant, straight-back pressure to keep bolt lugs square against the receiver while lapping with 600 to 800 grit, silicon carbide abrasive. Provides better results than mere thumb pressure. Interchangeable threaded sleeves fit... | go to store |
 | Brownells Blank Screw Kit - 1/4" Blank Screw Refill 20 Pack All that is needed is a die with the right threads to make a vast variety of gun screws simply and immediately! You will also need a file, and either a drill press or a pin vise. You can give them any thread length, any overall length and any head... ... more
Brownells Blank Screw Kit - 1/4" Blank Screw Refill 20 Pack All that is needed is a die with the right threads to make a vast variety of gun screws simply and immediately! You will also need a file, and either a drill press or a pin vise. You can give them any thread length, any overall length and any head... | go to store |
 | Brownells Bolt Lapping Tools - One Gun Bolt Lapping Set Fits Mauser Small Spring-loaded tool gives constant, straight-back pressure to keep bolt lugs square against the receiver while lapping with 600 to 800 grit, silicon carbide abrasive. Provides better results than mere thumb pressure. Interchangeable threaded sleeves fit... ... more
Brownells Bolt Lapping Tools - One Gun Bolt Lapping Set Fits Mauser Small Spring-loaded tool gives constant, straight-back pressure to keep bolt lugs square against the receiver while lapping with 600 to 800 grit, silicon carbide abrasive. Provides better results than mere thumb pressure. Interchangeable threaded sleeves fit... | go to store |
 | Brownells Bolt Lapping Tools - One Gun Bolt Lapping Set Fits Savage Small Spring-loaded tool gives constant, straight-back pressure to keep bolt lugs square against the receiver while lapping with 600 to 800 grit, silicon carbide abrasive. Provides better results than mere thumb pressure. Interchangeable threaded sleeves fit... ... more
Brownells Bolt Lapping Tools - One Gun Bolt Lapping Set Fits Savage Small Spring-loaded tool gives constant, straight-back pressure to keep bolt lugs square against the receiver while lapping with 600 to 800 grit, silicon carbide abrasive. Provides better results than mere thumb pressure. Interchangeable threaded sleeves fit... | go to store |
 | Brownells Power Custom Brass Muzzle Crowning Lap - Non-Handled Fits Bore .44-50 Tip Radius 5/16" (7. Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill. Mfg: Brownells SPECS: Brass. 3" (7.62cm) long. Sets include (4) laps, one of... ... more
Brownells Power Custom Brass Muzzle Crowning Lap - Non-Handled Fits Bore .44-50 Tip Radius 5/16" (7. Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill. Mfg: Brownells SPECS: Brass. 3" (7.62cm) long. Sets include (4) laps, one of... | go to store |
 | Brownells 45� Brass Muzzle Lap - 45�brass Lap Use to polish after using 45� Chamfer Cutters; or for lapping out dings, sharp edges, etc., by itself. Improves accuracy. Use with abrasive paste - like our Silicon Carbide grits - mounted in variable speed electric drill. Made of half-hard brass to... ... more
Brownells 45� Brass Muzzle Lap - 45�brass Lap Use to polish after using 45� Chamfer Cutters; or for lapping out dings, sharp edges, etc., by itself. Improves accuracy. Use with abrasive paste - like our Silicon Carbide grits - mounted in variable speed electric drill. Made of half-hard brass to... | go to store |
 | Brownells Extractor Milling Cutters - 15/64", Slot Width .231" Carbide, center-cutting, four-flute mills precisely cut the groove necessary to install a Sako extractor on your Remington bolt for positive, reliable extraction. High-cobalt content improves feed rates for fast cutting. Order the cutter that matches... ... more
Brownells Extractor Milling Cutters - 15/64", Slot Width .231" Carbide, center-cutting, four-flute mills precisely cut the groove necessary to install a Sako extractor on your Remington bolt for positive, reliable extraction. High-cobalt content improves feed rates for fast cutting. Order the cutter that matches... | go to store |
 | Brownells Extractor Milling Cutters - 11/64", Slot Width .172" Carbide, center-cutting, four-flute mills precisely cut the groove necessary to install a Sako extractor on your Remington bolt for positive, reliable extraction. High-cobalt content improves feed rates for fast cutting. Order the cutter that matches... ... more
Brownells Extractor Milling Cutters - 11/64", Slot Width .172" Carbide, center-cutting, four-flute mills precisely cut the groove necessary to install a Sako extractor on your Remington bolt for positive, reliable extraction. High-cobalt content improves feed rates for fast cutting. Order the cutter that matches... | go to store |
 | Brownells Extractor Milling Cutters - 5/32", Slot Width .152" Carbide, center-cutting, four-flute mills precisely cut the groove necessary to install a Sako extractor on your Remington bolt for positive, reliable extraction. High-cobalt content improves feed rates for fast cutting. Order the cutter that matches... ... more
Brownells Extractor Milling Cutters - 5/32", Slot Width .152" Carbide, center-cutting, four-flute mills precisely cut the groove necessary to install a Sako extractor on your Remington bolt for positive, reliable extraction. High-cobalt content improves feed rates for fast cutting. Order the cutter that matches... | go to store |
 | Brownells Fillister 6-48 Sight Screw Counterbore - Fillister 6-48 Counterbore Overall 2�"; Body Dia. .218"; Pilot Dia. .137"; Pilot Length 1⁄8"; 90� Shoulder. Use Drill No. 28 for Pilot Hole. Mfg: Brownells ... more
Brownells Fillister 6-48 Sight Screw Counterbore - Fillister 6-48 Counterbore Overall 2�"; Body Dia. .218"; Pilot Dia. .137"; Pilot Length 1⁄8"; 90� Shoulder. Use Drill No. 28 for Pilot Hole. Mfg: Brownells | go to store |
 | Brownells Weaver 6-48 Sight Screw Counterbore - Weaver 6-48 Counterbore Overall 2�"; Body Dia. .218"; Pilot Dia. .137"; Pilot Length 1⁄8"; 45� Shoulder. Use Drill No. 28 for Pilot Hole. Mfg: Brownells ... more
Brownells Weaver 6-48 Sight Screw Counterbore - Weaver 6-48 Counterbore Overall 2�"; Body Dia. .218"; Pilot Dia. .137"; Pilot Length 1⁄8"; 45� Shoulder. Use Drill No. 28 for Pilot Hole. Mfg: Brownells | go to store |
 | Brownells Fillister 8-40 Sight Screw Counterbore Overall 2�" (6.3mm); Body Dia. .250" (6.3mm); Pilot Dia. .165" (4.2mm); Pilot Length 1⁄8" (3.2mm); 90� Shoulder. Use Drill No. 19 for Pilot Hole. Mfg: Brownells ... more
Brownells Fillister 8-40 Sight Screw Counterbore Overall 2�" (6.3mm); Body Dia. .250" (6.3mm); Pilot Dia. .165" (4.2mm); Pilot Length 1⁄8" (3.2mm); 90� Shoulder. Use Drill No. 19 for Pilot Hole. Mfg: Brownells | go to store |
 | Brownells Weaver 8-40 Sight Screw Counterbore Overall 2�" (6.3mm); Body Dia. .250" (6.3mm); Pilot Dia. .165" (4.2mm); Pilot Length 1⁄8" (3.2mm); 45� Shoulder. Use Drill No. 19 for Pilot Hole. Mfg: Brownells ... more
Brownells Weaver 8-40 Sight Screw Counterbore Overall 2�" (6.3mm); Body Dia. .250" (6.3mm); Pilot Dia. .165" (4.2mm); Pilot Length 1⁄8" (3.2mm); 45� Shoulder. Use Drill No. 19 for Pilot Hole. Mfg: Brownells | go to store |
 | Brownells Barrel Set-Back Fixture - Master Barrel Set Back Furniture Set Properly fit new factory or bull barrels, or set back existing barrels to adjust barrel/cylinder gap, without a lathe. Mfg: Brownells SPECS: Kit includes steel fixture body - 27/8" (7.30cm) long, adjustable carbide cutter, one bore pilot, adjustable... ... more
Brownells Barrel Set-Back Fixture - Master Barrel Set Back Furniture Set Properly fit new factory or bull barrels, or set back existing barrels to adjust barrel/cylinder gap, without a lathe. Mfg: Brownells SPECS: Kit includes steel fixture body - 27/8" (7.30cm) long, adjustable carbide cutter, one bore pilot, adjustable... | go to store |
Ads related to Brownells Carbide Center Drill - #1 Carbide Center Drill 3/64"
