Micro 100 › 100 pack 1 1 4

Micro 100 Sq. End Mill Single End Carb 1.20mm AMRM-012-2

Square End Mill 1.20 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3.80 mm Overall Length 50.00 mm Shank Dia. 4.00 mm more

Micro 100 Sq. End Mill Single End Carb 1/8 SEM-125-04X

Square End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/4 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 1.40mm RMEM-014-2

Square End Mill 1.40 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 4.20 mm Overall Length 38.00 mm Shank Dia. 3.00 mm more

Micro 100 Sq. End Mill Single End Carb 1.30mm AMRM-013-2X

Square End Mill 1.30 mm Milling Dia. Carbide AlTiN Straight Length of Cut 3.90 mm Overall Length 50.00 mm Shank Dia. 4.00 mm more

Micro 100 Sq. End Mill Single End Carb 1.50mm RMEM-015-2X

Square End Mill 1.50 mm Milling Dia. Carbide AlTiN Straight Length of Cut 4.20 mm Overall Length 38.00 mm Shank Dia. 3.00 mm more

Micro 100 Sq. End Mill Single End Carb 1.90mm AMRM-019-2X

Square End Mill 1.90 mm Milling Dia. Carbide AlTiN Straight Length of Cut 5.70 mm Overall Length 50.00 mm Shank Dia. 4.00 mm more

Micro 100 Sq. End Mill Single End Carb 1.60mm RMEM-016-2

Square End Mill 1.60 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 4.80 mm Overall Length 38.00 mm Shank Dia. 3.00 mm more

Micro 100 Sq. End Mill Single End Carb 1.90mm AMRM-019-2

Square End Mill 1.90 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5.70 mm Overall Length 50.00 mm Shank Dia. 4.00 mm more

Micro 100 Sq. End Mill Single End Carb 1/8 SEM-125-03X

Square End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/4 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 1.10mm AMRM-011-2

Square End Mill 1.10 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3.30 mm Overall Length 50.00 mm Shank Dia. 4.00 mm more

Micro 100 Sq. End Mill Single End Carb 1.30mm AMRM-013-2

Square End Mill 1.30 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3.90 mm Overall Length 50.00 mm Shank Dia. 4.00 mm more

Micro 100 Sq. End Mill Single End Carb 1.50mm RMEM-015-2

Square End Mill 1.50 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 4.20 mm Overall Length 38.00 mm Shank Dia. 3.00 mm more

Micro 100 Sq. End Mill Single End Carb 1.80mm AMRM-018-2

Square End Mill 1.80 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5.30 mm Overall Length 50.00 mm Shank Dia. 4.00 mm more

Micro 100 Ball End Mill Single End 1/8 Carbide BEM-125-02

Ball End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Non-Coolant Through more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0200 rad GEC-125-3-020X

Corner Radius End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.02 in 1/2 in 1 1/2 in more

Micro 100 Threading Tool 1/8 Carbide IT-080500

Threading Tool Included Angle 60 Degrees Carbide Bright (Uncoated) 0.0180 in Threading more

Micro 100 Sq. End Mill Single End Carb 1/32 SEM-031-02X

Square End Mill 1/32 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/16 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0200 rad GEC-125-3-020

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.02 in 1/2 in 1 1/2 in more

Micro 100 Single-Point Tool Bit Carbide RXD-1

Single-Point Tool Bit RXD Carbide Zinc Right Hand Shank Width 3/8 in more

Micro 100 Corner Rounding End Mill 1.50mm Carbide CRE-625-218X

Double End Corner Rounding End Mill 7/64 in Number of Flutes 3 Carbide AlTiN Straight more

Micro 100 Cor Rad End Mill 1/16 Carb 0.0100 rad GEC-062-3-010

Corner Radius End Mill 1/16 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 3/16 in 1 1/2 in more

Micro 100 Ball End Mill Single End 1/32 Carbide BEM-031-03

Ball End Mill 1/32 in Milling Dia. Carbide Bright (Uncoated) Non-Coolant Through more

Micro 100 Solid Router Bit 1/2 Spiral Downcut SFP-500-812

Solid Router Bit Primary Material Application Composite Spiral Upcut Fractional Inch 1/2 in Cutter Dia. more

Micro 100 Ball End Mill Single End 1/8 Carbide BEF-125-375K

Ball End Mill 1/8 in Milling Dia. Carbide nACRo Non-Coolant Through more

Micro 100 QC Boring Tool Bore Dia. .230 D 1.25 QPF-2301250X

Quick Change Profiling Tool 5/16 in AlTiN Right Hand more

Micro 100 Engraving Tool 1/2 L of Cut Carbide RNC-312-2

Engraving Tool Double End 90 Degrees Carbide Bright (Uncoated) Fractional Inch 0.0040 in 1/2 in more

Micro 100 Cor Rad End Mill 12.00mm Carb 1.50mm rad AECM-1215-4X

Corner Radius End Mill 12.00 mm Milling Dia. Carbide AlTiN Straight Metric 1.50mm 30.00 mm 83.00 mm more

Micro 100 Engraving Tool 5/8 L of Cut Carbide RNC-500-1

Engraving Tool Single End 90 Degrees Carbide Bright (Uncoated) Fractional Inch .004 in 5/8 in more

Micro 100 Single-Point Tool Bit 1/2 Carbide FRT-8

Single-Point Tool Bit FRT Carbide Zinc Shank Width 1/2 in more

Micro 100 Cor Rad End Mill 1/32 Carb 0.0050 rad GEC-031-3-005

Corner Radius End Mill 1/32 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.005 in 5/64 in 1 1/2 in more

Micro 100 Sq. End Mill Single End Carb 1/32 EMS-031-3

Square End Mill 1/32 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5/64 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Single-Point Tool Bit 1/2 Carbide C-500

Single-Point Tool Bit C Carbide Zinc Neutral Shank Width 1/2 in more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0300 rad VHSM-030-5

Corner Radius End Mill 3.00 mm Milling Dia. Carbide Bright (Uncoated) Weldon Flat Metric 0.30mm 6.00 mm 50.00 mm more

Micro 100 Threading Tool 1/2 Carbide QIT-4601500

Threading Tool Included Angle 60 Degrees Carbide Bright (Uncoated) 0.2100 in Coolant Through Threading more

Micro 100 Solid Router Bit 1/8 Spiral Downcut SFP-125-24

Solid Router Bit Primary Material Application Composite Spiral Upcut Fractional Inch 1/8 in Cutter Dia. more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0100 rad MEF-125-1000-010

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 1/8 in 2 in more

Micro 100 Threading Tool 1/2 Carbide QIT-490750

Threading Tool Included Angle 60 Degrees Carbide Bright (Uncoated) 0.2400 in Coolant Through Threading more

Micro 100 Cor Rad End Mill 1/2 Carb 0.0600 rad VHSM-080-5

Corner Radius End Mill 8.00 mm Milling Dia. Carbide Bright (Uncoated) Weldon Flat Metric 0.50mm 16.00 mm 63.00 mm more