husqvarna 581685305 8 x 1

3/8-16 X 7/8 X 1 1/8 Washer Base Wing Nuts / Die Cast Zinc Alloy / Washer OD: 7/8 / Wing Spread: 1 1/8 (Quantity: 1 000 pcs)

Washer Based Wing Nut Zamac #3 Zinc Alloy Die Cast Zinc Alloy more

Pacific Bearing 5/8 ID 2-1/2 OAW x 1.938 OAL x 1-5/8 OAH Open Single Pillow Block 1-15/16 Overall Length x 1-5/8 Overall Height x 2-1/2 Width

Pacific Bearing 5/8 ID 2-1/2 OAW x 1.938 OAL x 1-5/8 OAH Open Single Pillow Block 1-15/16 Inch Overall Length x 1-5/8 Inch Overall Height x 2-1/2 Inch Width more

3/8 OD Hex Standoffs (Female-Female) / 8-32 x 1 1/8 / Aluminum / Outer Diameter: 3/8 / Thread Size: 8-32 / Length: 1 1/8 (Quantity: 1 000 pcs)

3/8 Hex Standoffs Aluminum Alloy #2011 (or equivalent) more

1 1/8-7 x 8 1/2 Hex Head Cap Screws Alloy Steel Grade 8 Plain Finish (Quantity: 14 pcs) - Coarse Thread UNC Partially Threaded Length: 8 1/2 Inch Thread Size: 1 1/8 Inch

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications. more

1/4-20 X 7/8 X 1 1/8 Washer Base Wing Nuts / Die Cast Zinc Alloy / Washer OD: 7/8 / Wing Spread: 1 1/8 (Quantity: 1 000 pcs)

Washer Based Wing Nut Zamac #3 Zinc Alloy Die Cast Zinc Alloy more

Hex Coupling Nuts 3/8 -16 X 1/2 X 1 1/8 A563 Grade A Steel Zinc Plated (Quantity: 50) Thread Size: 3/8 -16 Length: 1 1/8 Width: 1/2

Across the Flats:1/2 inches Also referred to as Rod Couplings The length of the nut is 2.5D where D equals the basic major thread diamter. more

Hex Coupling Nuts 3/8 -16 X 1/2 X 1 1/8 A563 Grade A Steel Zinc Plated (Quantity: 50) Thread Size: 3/8 -16 Length: 1 1/8 Width: 1/2

Across the Flats:1/2 inches Also referred to as Rod Couplings The length of the nut is 2.5D where D equals the basic major thread diamter. more

Hex Coupling Nuts 3/8 -16 x 1/2 x 1 1/8 A563 Grade A Steel Zinc Plated (Quantity: 50) Thread Size: 3/8 -16 Length: 1 1/8 Width: 1/2

A double chamfered hex nut used to join two externally threaded parts of equal thread diameter and pitch often two pieces of threaded rod more

1 1/8-7 x 8 1/2 Hex Head Cap Screws Alloy Steel Grade 8 Zinc Yellow Plating (Quantity: 14 pcs) - Coarse Thread UNC Partially Threaded Length: 8 1/2 inch Thread Size: 1 1/8 inch

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications. more

Hex Coupling Nuts 3/8 -24 x 1/2 x 1 1/8 A563 Grade A Steel Zinc Plated (Quantity: 50) Thread Size: 3/8 -24 Length: 1 1/8 Width: 1/2

A double chamfered hex nut used to join two externally threaded parts of equal thread diameter and pitch often two pieces of threaded rod more

Reducer Hex Coupling Nuts 1/2 -13 to 3/8 -16 x W5/8 x 1-1/4 Reducer A563 Grade A Steel Zinc Plated (Quantity: 25) Thread Sizes: 1/2 -13 and 3/8 -16 Across The Flats: 5/8 / Length of Nut: 1 1/4

A double chamfered hex nut with two different internal thread sizes at opposite ends of the nut. Used to join a larger diameter rod to a smaller diameter rod. more

Hex Coupling Nuts 3/8 -16 X 1/2 X 1 1/8 A563 Grade A Steel Zinc Plated (Quantity: 50) Thread Size: 3/8 -16 Length: 1 1/8 Width: 1/2

Across the Flats:1/2 inches Also referred to as Rod Couplings The length of the nut is 2.5D where D equals the basic major thread diamter. more

Reducer Coupling Nuts 1/2 -13 To 3/8 -16 X W5/8 X 1-1/4 Reducer A563 Grade A Steel Zinc Plated (Quantity: 25) Thread Sizes: 1/2 -13 And 3/8 -16 Across The Flats: 5/8 / Length Of Nut: 1 1/4

Thank you for your custom.Customer care is our top priority. Offer is subject to availability.We promise you won t regret buying it. Reducer Hex Coupling Nuts - Accommodates Two Different Thread Sizes Thread Sizes:1/2 -13 and 3/8 -16 Across the... more

3/8 OD Hex Standoffs (Male-Female) / 8-32 x 1 1/8 / Stainless Steel / Outer Diameter: 3/8 / Thread Size: 8-32 / Length: 1 1/8 (Quantity: 100 pcs)

3/8 Hex Male-Female Standoffs 303 Stainless Steel more

1 1/8-12 x 8 Hex Head Cap Screws Alloy Steel Grade 8 Plain Finish (Quantity: 1 pcs) - Fine Thread UNF Partially Threaded Length: 8 Inch Thread Size: 1 1/8 Inch

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications. more

New Single Coat Hook - Brass sea-dog Line 671500-1 Brass 2-1/16 x 5/8 x C 1-1/8 D 1-7/8 E 1-1/4

New Single Coat Hook - Brass sea-dog Line 671500-1 Brass 2-1/16 x 5/8 x C 1-1/8 D 1-7/8 E 1-1/4 more

Hex Bolts Grade 5 Plain Finish 1 1/8 -7 x 8 (Quantity: 1 pcs) Partially Threaded UNC Thread (Thread Size: 1 1/8 ) x (Length: 8 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 2.75... more

5/16-18 X 7/8 X 1 1/8 Washer Base Wing Nuts / Die Cast Zinc Alloy / Washer OD: 7/8 / Wing Spread: 1 1/8 (Quantity: 1 000 pcs)

Washer Based Wing Nut Zamac #3 Zinc Alloy Die Cast Zinc Alloy more

Hex Bolts Grade 5 Plain Finish 1 1/8 -12 x 8 (Quantity: 1 pcs) Partially Threaded UNF Thread (Thread 1 1/8 ) x (Length: 8 )

Grade 5 Steel with a Plain Finish and manufactured to ASME B18.2.1 Plain steel surface (no finish or coatings) will corrode in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 2.75... more

1 1/8-7 x 8 1/2 Hex Head Cap Screws Steel Grade 5 Plain Finish (Quantity: 14 pcs) - Coarse Thread UNC Partially Threaded 8 1/2 Inch Thread 1 1/8 Inch

When selecting a nut to be used for a graded hex cap screw keep in mind that the nut should have the same grade as the bolt/screw. For instance a Grade 5 Hex Cap Screw should only utilize a Grade 5 hex nut more

8-1/8 in. x 8-1/8 in. x 1-5/8 in. Unfinished Hand Carved North American Alder Acanthus Wood Onlay Capital Wood Applique

Each piece of appliqué or onlay is meticulously hand carved by skilled and experienced artisans who pay delicate attention to intricate detail beauty and ornamentation. The design motifs are carefully hand carved in deep relief to achieve the highest... more

Husqvarna 596434404 Shoulder Bolt 3 8-16 x 3-5 8 TC 138 Mower

Brand New Genuine Husqvarna 596434404 Shoulder Bolt (157131) 3/8-16X3-5/8 Fits 532193406... Genuine Husqvarna Part # 596434404 Fits Specific Husqvarna Models That Require This Part # Also Will Fit Other Husqvarna Produced Brands that Require This Part... more

3/8 OD Round Spacers / #8 x 1/8 / Nylon / Outer Diameter: 3/8 / Hole Size: #8 / Length: 1/8 (Quantity: 1 000 pcs)

3/8 Round Standard Spacers Type 6/6 Nylon more

3/8 OD Round Spacers / #8 x 1/8 / Aluminum / Outer Diameter: 3/8 / Hole Size: #8 / Length: 1/8 (Quantity: 1 000 pcs)

3/8 Round Spacers Aluminum Alloy #2011 (or equivalen) more

3/8 OD Hex Standoffs (Male-Female) / 8-32 x 1 3/8 / Aluminum / Outer Diameter: 3/8 / Thread Size: 8-32 / Length: 1 3/8 (Quantity: 1 000 pcs)

3/8 Hex Male-Female Standoffs Aluminum Alloy #2011 (or equivalent) more

3/8-24 x 1 1/8 Hex Head Cap Screws Stainless Steel 18-8 Plain Finish (Quantity: 100 pcs) - Fine Thread UNF Fully Threaded Length: 1 1/8 Inch Thread Size: 3/8 Inch

Used in products that require general atmospheric corrosion resistance such as chemical and food processing dquipment more

3/8-16 x 1 1/8 Hex Head Cap Screws Alloy Steel Grade 8 Zinc Yellow Plating (Quantity: 100 pcs) - Coarse Thread UNC Fully Threaded 1 1/8 Inch Thread 3/8 Inch

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications. more

3/8-24 x 1 1/8 Hex Head Cap Screws Alloy Steel Grade 8 Zinc Yellow Plating (Quantity: 800 pcs) - Fine Thread UNF Fully Threaded 1 1/8 Inch Thread 3/8 Inch

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications. more

3/8-16 x 1 1/8 Hex Head Cap Screws Alloy Steel Grade 8 Zinc Yellow Plating (Quantity: 100 pcs) - Coarse Thread UNC Fully Threaded Length: 1 1/8 Inch Thread Size: 3/8 Inch

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications. more

Hex Bolts Grade 5 Zinc Plated 3/8 -16 x 1 1/8 (Quantity: 100 pcs) Fully Threaded UNC Thread (Thread Size: 3/8 ) x (Length: 1 1/8 )

Grade 5 Steel with a Zinc Finish and manufactured to ASME B18.2.1 Zinc-plated steel screws to resist corrosion in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are FULLY threaded hex head cap screws Head Height: 15/64 in. /... more

3/8-16 x 1 1/8 Hex Head Cap Screws Alloy Steel Grade 8 Zinc Yellow Plating (Quantity: 800 pcs) - Coarse Thread UNC Fully Threaded 1 1/8 Inch Thread 3/8 Inch

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications. more

Hex Bolts Grade 5 Zinc Plated 1 1/8 -7 x 8 (Quantity: 5 pcs) Partially Threaded UNC Thread (Thread Size: 1 1/8 ) x (Length: 8 )

Grade 5 Steel with a Zinc Finish and manufactured to ASME B18.2.1 Zinc-plated steel screws to resist corrosion in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are PARTIALLY Threaded Bolts with a minium of 2.75 inches of thread... more

3/8-24 x 1 1/8 Hex Head Cap Screws Alloy Steel Grade 8 Zinc Yellow Plating (Quantity: 100 pcs) - Fine Thread UNF Fully Threaded Length: 1 1/8 Inch Thread Size: 3/8 Inch

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications. more

#8 x 1-5/8 Stainless Steel Deck Screw Phillips Drive Bugle Head (Quantity: 3000) Type 17 Wood Cutting Point 1-1/8 of Thread Length #8 Screw Diameter 1-5/8 Screw Length

HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws (Drywall Screws) are high quality grade 18-8 Stainless Steel giving the screws one of the highest forms of corrosion resistance and strength making it last longer than other hardware on the market... more

Hex Bolts Grade 5 Yellow Zinc 3/8 -16 x 1 1/8 (Quantity: 100 pcs) Fully Threaded UNC Thread (Thread Size: 3/8 ) x (Length: 1 1/8 )

Grade 5 Steel with a Yellow Zinc Finish and manufactured to ASME B18.2.1 Zinc-plated steel screws to resist corrosion in wet environments Meets ASME B18.2.1 and SAE J429 specifications These are FULLY threaded hex head cap screws Head Height: 15/64 in.... more

1 1/8-7 x 8 Hex Head Cap Screws Alloy Steel Grade 8 Plain Finish (Quantity: 5 pcs) - Coarse Thread UNC Partially Threaded Length: 8 Inch Thread Size: 1 1/8 Inch

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications. more

3/8-24 x 1 1/8 Hex Head Cap Screws Alloy Steel Grade 8 Zinc Yellow Plating (Quantity: 100 pcs) - Fine Thread UNF Fully Threaded 1 1/8 Inch Thread 3/8 Inch

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications. more

1 1/8-12 x 8 Hex Head Cap Screws Alloy Steel Grade 8 Plain Finish (Quantity: 15 pcs) - Fine Thread UNF Partially Threaded Length: 8 Inch Thread Size: 1 1/8 Inch

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications. more