Home Hardware

SENCO W3075YXC Collated Concrete Nail, 3/4 in L, 12 ga, Zinc Galvanized, Flat

Concrete Nails,3/4 In. L,Zinc Plated,PK1000, Overall Length 3/4 in, Shank Diameter 0.109 in, Gauge 12 ga, Product Type Concrete Nails, Material Steel, Finish Zinc Plated, Head Type Flat, Shank Type Smooth, Point Type Pinched, Collation Type Plastic,... more

GlideRite 6-inch Oil Rubbed Bronze Zinc Euro T-bar Cabinet Handle Bar Pulls (Case of 25)

Update your kitchen cabinets or bathroom vanities with these beautiful 6-inch pulls made from solid die-cast zinc alloy. Finished in luxurious oil rubbed bronze, these cabinet drawer bar pulls are a modern take on classic design. more

Rok Hardware 20-gauge Zinc Metal Heavy-duty Bracket Right Angle Brace (Pack of 25)

Build corner joints with this 25-pack of Rok Hardware metal right-angle braces. Made from 20-gauge zinc, the heavy-duty bracket is tough and durable. Pre-drilled holes accommodate standard screws for ... more

GlideRite 6-inch Oil Rubbed Bronze Zinc Euro T-bar Cabinet Handle Bar Pulls (Case of 10)

Dress up your cabinets by upgrading to these quality cabinet pulls by GlideRite Hardware . These pulls are a perfect addition or replacement for any kitchen or bathroom cabinet.. more

DEWALT 03781-PWR Drive Nail Drive Anchor, 1/2" Dia., 3" L, Steel Zinc Plated,

Hammer Drive Pin Anchor, Anchor Diameter 1/2 in, Overall Length 3 in, Anchor Material Steel, Finish Zinc Plated, Head Type Round, Head Height 0.25 in, Head Diameter 1 in, Drill Bit Size 1/2 in, Minimum Installation Depth 2 5/8 in, Drive Pin Anchor Type... more

ZORO SELECT B38205.037.0001 Flat Washer, Fits Bolt Size 3/8" ,Steel Zinc Plated

Flat Washer, Flat Washer Type SAE, Dimensional Standards ASME B18.21.1, SAE, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, For Screw Size 3/8 in, Inside Diameter 0.406 in, Outside Diameter 13/16 in, Maximum Thickness 0.063 in,... more

CAMPBELL CHAIN & FITTINGS T0140823 1/2" Grade 30 Proof Coil Chain, Zinc Plated,

Straight Chain, Chain Type Proof Coil Chain, Material Carbon Steel, Lifting Capability Not for Lifting, Working Load Limit 4,500 lb, Chain Grade 30, Trade Size 1/2 in, Link Inside Length 1 3/4 in, Link Type Straight, Link Inside Width 3/4 in, Overall... more

ZORO SELECT Z9675 Fender Washer, Fits Bolt Size 1-1/4" ,Steel Zinc Plated Finish

Thick Fender Washer, Flat Washer Type Oversized, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, For Screw Size 1 1/4 in, Inside Diameter 1.375 in, Outside Diameter 3 1/4 in, Maximum Thickness 0.5 in, System of Measurement Inch,... more

ZORO SELECT 205826BG Coupling Nut, 1-1/4"-7, Steel, Grade 8, Zinc Plated, 3 in

Coupling Nut, Material Grade/Class Grade 8, Material Steel, Finish Zinc Plated, Thread Size 1 1/4 In.-7, Thread Style Fully Threaded, Hex Width 1 7/8 in, Overall Length 3 in, Dimensional Standards ASME B18.2.2, RoHS Compliant, Material Quality... more

ZORO SELECT 1XPB7 Paddle Latch,Keyed,Zinc Plated

Paddle Latch, Push-to-Close, Push, Adjustable No, Locking, Catch/Latch Material Steel, Catch/Latch Finish Zinc, Catch/Latch Height 3 5/8 in, Catch/Latch Width 4 3/4 in, Catch/Latch Depth 7/8 in, Grip 7/8 in, Mounting Hole Dia. 3/16 in more

ZORO SELECT 658145-PG 3/16"-24 x 3/4 in Slotted Flat Machine Screw, Zinc Plated

Stove Bolt, Head Type Flat, Material Steel, Finish Zinc Plated, Drive Slotted, Thread Size 3/16 In.-24, Fastener Length 3/4 in, Head Width 0.362 in, Head Height 0.116 in, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.6.3, Pack Size Small,... more

PASLODE 650047 Collated Finishing Nail, 2 in L, 16 ga, Zinc Galvanized, T-Head

Angled Finish Nails,2 In. L,PK2000, Overall Length 2 in, Shank Diameter 2 in, Gauge 16 ga, Product Type Finishing Nails, Material Steel, Finish Galvanized, Penny Size 6D, Head Type T Head, Head Diameter Not Applicable, Shank Type Smooth, Point Type... more

ZORO SELECT Z9270 Flat Washer, Fits Bolt Size 1/4" ,Steel Zinc Yellow Finish,

Thick Washer, Flat Washer Type Standard, Dimensional Standards AMPG 2001 FL.06, Material Steel, Material Grade/Class Grade 8, Finish Zinc Yellow, For Screw Size 1/4 in, Inside Diameter 0.281 in, Outside Diameter 5/8 in, Maximum Thickness 0.108 in,... more

ZORO SELECT 205271BG Coupling Nut, 3/4"-10, Steel, Grade 8, Zinc Plated, 2-1/4

Coupling Nut, Material Grade/Class Grade 8, Material Steel, Finish Zinc Plated, Thread Size 3/4 In.-10, Thread Style Fully Threaded, Hex Width 1 1/8 in, Overall Length 2 1/4 in, Dimensional Standards ASME B18.2.2, RoHS Compliant, Material Quality... more

ITW BEE LEITZKE WWG-DISP-CP550 Cotter Pin Asst,LCS,Zinc,550 Pcs,7 Sizes

Pin Assortment,550 pcs,7 Sizes, Manufacturer Location Globally Sourced, Made in North America No, Product Type Cotter Pin Assortment, Material Grade/Class 1008, Standards ANSI B 18.8.1, ASME B18.8.1, Number of Pieces 550, Number of Sizes 7, Finish Zinc... more

ZORO SELECT 1XPB5 Paddle Latch, Nonlocking, Zinc Plated, Catch/Latch Material:

Paddle Latch, Push-to-Close, Push, Adjustable No, Non-locking, Catch/Latch Material Steel, Catch/Latch Finish Zinc, Catch/Latch Height 3 5/8 in, Catch/Latch Width 4 3/4 in, Catch/Latch Depth 7/8 in, Grip 7/8 in, Mounting Hole Dia. 3/16 in more

ZORO SELECT Z0638 Fender Washer, Fits Bolt Size 3/8" ,Steel Zinc Plated Finish,

Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.22.1, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, For Screw Size 3/8 in, Inside Diameter 0.406 in, Outside Diameter 2 in, Maximum Thickness 0.08 in, System... more

ZORO SELECT 4RRK7 Draw Latch,Nonlocking,Zinc Plated

Draw Latch, Draw, Lift, Adjustable Yes, Non-locking, Catch/Latch Material Steel, Catch/Latch Finish Zinc, Catch/Latch Height 1 3/16 in, Catch/Latch Width 3 23/32 in, Catch/Latch Depth 3/4 in, Includes No. 8 and No.10 Screws, Panel Through Hole/Screw... more

ZORO SELECT TRFI21000X2-003P Fully Threaded Rod, 1"-14, 2 ft, Steel, Zinc

Fully Threaded Rod, Material Steel, Finish Zinc Plated, Thread Size 1 In.-14, Overall Length 2 ft, Tensile Strength 65,000 psi, System of Measurement Inch, Thread Direction Right Hand, Includes Nuts No, Minimum Yield Strength 36,000 psi, Number of Nuts... more

ZORO SELECT 20311 Fully Threaded Rod, 1"-14, 3 ft, Steel, Grade 2, Zinc Plated

Fully Threaded Rod, Material Grade/Class Grade 2, Material Steel, Finish Zinc Plated, Thread Size 1 In.-14, Overall Length 3 ft, Tensile Strength 60,000 psi, System of Measurement Inch, Thread Direction Right Hand, Includes Nuts No, Nut Width Not... more

ZORO SELECT SMHWI0-800750SL-1110P Sheet Metal Screw, #8 x 3/4 in, Zinc Plated

Sheet Metal Screw, Head Type Hex Washer, Finish Zinc Plated, Material Steel, Screw Size #8, Fastener Length 3/4 in, Head Width 0.348 in, Head Height 0.11 in, Dimensional Standards ASME B18.6.4, Pack Size Small, System of Measurement Inch, Drive... more

ZORO SELECT 205825BG Coupling Nut, 1"-8, Steel, Grade 8, Zinc Plated, 2-3/4 in

Coupling Nut, Material Grade/Class Grade 8, Material Steel, Finish Zinc Plated, Thread Size 1 In.-8, Thread Style Fully Threaded, Hex Width 1 1/2 in, Overall Length 2 3/4 in, Dimensional Standards ASME B18.2.2, RoHS Compliant, Material Quality... more

PASLODE 650232 Collated Finishing Nail, 2-1/2 in L, 16 ga, Zinc Galvanized,

Angled Finish Nails,2 1/2 In. L,PK2000, Overall Length 2 1/2 in, Shank Diameter 2.5 in, Gauge 16 ga, Product Type Finishing Nails, Material Steel, Finish Galvanized, Penny Size 8D, Head Type T Head, Head Diameter Not Applicable, Shank Type Smooth,... more

MALCO HW8X3/4ZT Sheet Metal Screw, #8 x 3/4 in, Zinc Plated Steel Hex Head

Self-Piercing Screw, Head Type Hex Washer, Finish Zinc Plated, Material Steel, Screw Size #8, Fastener Length 3/4 in, Head Width 0.375 in, Head Height 0.109 in, Drive Size 1/4 in, Dimensional Standards RoHS Compliant, Pack Size Small, Minimum Head... more

ZORO SELECT 203715BG Coupling Nut, 3/4"-10, Steel, Grade 2, Zinc Plated, 5 in

Coupling Nut, Material Grade/Class Grade 2, Material Steel, Finish Zinc Plated, Thread Size 3/4 In.-10, Thread Style Partially Threaded, Hex Width 1 1/4 in, Overall Length 5 in, Dimensional Standards ASME B18.2.2, RoHS Compliant, Material Quality... more

ITW BEE LEITZKE WWG-DISP-BP074 Hairpin Cotter Asst,Zinc,74 Pcs,8 Sizes

Pin Assortment,74 pcs,8 Sizes, Manufacturer Location Globally Sourced, Made in North America No, Product Type Bridge Pin Assortment, Material Grade/Class Ungraded, Standards ANSI B 18.8.1, ASME B18.8.1, Number of Pieces 74, Number of Sizes 8, Finish... more

ZORO SELECT 1XPB9 Paddle Latch, Nonlocking, Zinc Plated, Grip: 59/64 in

Paddle Latch, Push-to-Close, Push, Adjustable No, Non-locking, Catch/Latch Material Steel, Catch/Latch Finish Zinc, Catch/Latch Height 4 1/4 in, Catch/Latch Width 5 1/2 in, Catch/Latch Depth 7/8 in, Grip 59/64 in, Mounting Hole Dia. 3/16 in more

NASHVILLE WIRE KSG2472 Decking, Steel Wire, 72 in W, 24 in D, Zinc, Zinc

Decking, Gray, Decking Style Wire, Steel, Zinc Plated Decking Finish, 5 ga, Overall Width 72 in, Overall Depth 24 in, Load Capacity 500 lb more

ZORO SELECT 8145 Zinc Plated & Black Finish Thread Cutting Push On Nut

Push On Nut Assortment more

ITW BEE LEITZKE WWG-DISP-STOVE248 Bolt Assortment, Steel, Zinc Plated Finish

Stove Bolt Assortment, Container Height 1 1/2 in, Container Length 8 in, Container Width 4 1/2 in, Steel, Zinc Plated, Hex Nuts Included (40) UNC 1/4 in -20, (83) #10-24, Screws/Bolts Included #10; 1/4 in, Round, Number of Sizes 12, Coarse, Drive... more

RED HEAD WS-1244 Trubolt Wedge Anchor, 1/2" Dia., 4-1/2" L, Carbon Steel Zinc

Wedge Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Thread Size 1/2 In.-13, Overall Length 4 1/2 in, Thread Length 3 in, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size 1/2... more

ZORO SELECT U04114.037.0600 Grade 8, 3/8"-16 Hex Head Cap Screw, Zinc & Yellow

Hex Head Cap Screw, System of Measurement Inch, Basic Material Steel, Material Grade Grade 8, Fastener Finish Zinc Yellow, Dia./Thread Size 3/8 In.-16, Fastener Length 6 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse),... more

ZORO SELECT U70520.062.0400 Concrete Screw, 5/8" Dia., Hex, 4 in L, Steel Zinc

Screw Anchor, Anchor Diameter 5/8 in, Overall Length 4 in, Head Type Hex, Drive Type External Hex, Material Steel, Finish Zinc Plated, Material Grade/Class Case Hardened, Removable Removable, Compatible Material Concrete, Drill Bit Size 5/8 in, Screw... more

ZORO SELECT U38160.037.0005 Fender Washer, Fits Bolt Size 3/8" ,Steel Zinc

Fender Washer, Flat Washer Type Oversized, Dimensional Standards ASME B18.22.1, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, For Screw Size 3/8 in, Inside Diameter 0.406 in, Outside Diameter 2 in, Maximum Thickness 0.125 in, System... more

DEWALT 06335-PWR Steel Dropin Single Lag Shield, 1/4" Dia, 5/8" L, Steel Zinc

Expansion Anchor, Anchor Diameter 1/4 in, Overall Length 5/8 in, Thread Size 1/4 In.-20, Thread Depth 0.375 in, Thread Type Coarse, Material Steel, Finish Zinc Plated, Flange Style Flanged, Drill Bit Size 3/8 in, Minimum Hole Depth 5/8 in, System of... more

ZORO SELECT U24540.031.0600 5/16"-18 x 6 in Slotted Flat Machine Screw, Zinc

Machine Screw, Head Type Flat, Material Steel, Finish Zinc Plated, Drive Slotted, Thread Size 5/16 In.-18, Fastener Length 6 in, Head Width 0.579 in, Head Height 0.191 in, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.6.3, Pack Size... more

ZORO SELECT U24210.037.0200 3/8"-16 x 2 in Slotted Round Machine Screw, Zinc

Machine Screw, Head Type Round, Material Steel, Finish Zinc Plated, Drive Slotted, Thread Size 3/8 In.-16, Fastener Length 2 in, Head Width 0.717 in, Head Height 0.256 in, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.6.3, Pack Size... more

KABA ILCO BRL-01 Bottom Rail Lock,Cast Zinc,1-7/8in

Bottom Rail Lock, Material Cast Zinc, Finish Brass, Height 1 7/8 in more