gracie mills single 100 cotton

Micro 100 Sq. End Mill Single End Carb 0.0200 SME-020-2X

Square End Mill 1/64 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/64 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 1/4 SHL-250-4X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 1 1/8 in Overall Length 3 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 0.0900 MEF-090-400

Square End Mill 5/64 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/8 in Overall Length 1 1/2 in Shank Dia. 1/8 in Neck Dia. 5/64 in more

Micro 100 Ball End Mill Single End 3/8 Carbide BEM-375-03X

Ball End Mill 3/8 in Milling Dia. Carbide AlTiN Non-Coolant Through more

Micro 100 Sq. End Mill Single End Carb 9/32 GEM-281-4

Square End Mill 9/32 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 5/16 in more

Micro 100 Sq. End Mill Single End Carb 3/16 SEM-187-02

Square End Mill 3/16 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 3/8 in Overall Length 1 1/2 in Shank Dia. 3/16 in more

Micro 100 Sq. End Mill Single End Carb 0.0150 RME-015-2X

Square End Mill 1/64 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/32 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 0.0470 MEF-047-071K

Square End Mill 3/64 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/16 in Overall Length 1 1/2 in Shank Dia. 1/8 in Neck Dia. 3/64 in more

Micro 100 Sq. End Mill Single End Carb 5/64 SEM-078-03

Square End Mill 5/64 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5/32 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Ball End Mill Single End 3/8 Carbide BLR-375-4

Ball End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Non-Coolant Through more

Micro 100 Ball End Mill Single End 1/8 Carbide BEM-125-02

Ball End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Non-Coolant Through more

Micro 100 Sq. End Mill Single End Carb 0.0600 MEF-060-090

Square End Mill 3/64 in Milling Dia. Carbide nACRo Straight Length of Cut 5/64 in Overall Length 1 1/2 in Shank Dia. 1/8 in Neck Dia. 3/64 in more

Micro 100 Sq. End Mill Single End Carb 12.00mm GEMM-120-2

Square End Mill 12.00 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 22.00 mm Overall Length 83.00 mm Shank Dia. 12.00 mm more

Micro 100 Sq. End Mill Single End Carb 3.00mm GEMM-030-2

Square End Mill 3.00 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 7.00 mm Overall Length 38.00 mm Shank Dia. 3.00 mm more

Micro 100 Ball End Mill Single End 4.00mm Carbide MMBM-040-15X

Ball End Mill 4 mm Milling Dia. Carbide AlTiN Non-Coolant Through more

Micro 100 Sq. End Mill Single End Carb 3/32 SEM-093-02X

Square End Mill 3/32 in Milling Dia. Carbide AlTiN Straight Length of Cut 3/16 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Ball End Mill Single End 5/16 Carbide BEM-312-02X

Ball End Mill 5/16 in Milling Dia. Carbide AlTiN Non-Coolant Through more

Micro 100 Sq. End Mill Single End Carb 0.0450 MEF-045-500K

Square End Mill 1/32 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/16 in Overall Length 1 1/2 in Shank Dia. 1/8 in Neck Dia. 1/32 in more

Micro 100 Sq. End Mill Single End Carb 9/32 EMH-281-06X

Square End Mill 9/32 in Milling Dia. Carbide AlTiN Straight Length of Cut 3/4 in Overall Length 2 1/2 in Shank Dia. 5/16 in more

Micro 100 Sq. End Mill Single End Carb 1/2 ASM-500-2

Square End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5/8 in Overall Length 2 1/2 in Shank Dia. 1/2 in more

Micro 100 Sq. End Mill Single End Carb 1.40mm RMEM-014-2

Square End Mill 1.40 mm Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 4.20 mm Overall Length 38.00 mm Shank Dia. 3.00 mm more

Micro 100 Sq. End Mill Single End Carb 1/4 SEM-250-02

Square End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/2 in Overall Length 2 in Shank Dia. 1/4 in more

Micro 100 Sq. End Mill Single End Carb 3/8 SHR-375-4X

Square End Mill 3/8 in Milling Dia. Carbide AlTiN Straight Length of Cut 7/8 in Overall Length 2 1/2 in Shank Dia. 3/8 in more

Micro 100 Sq. End Mill Single End Carb 7/16 GEM-437-4X

Square End Mill 7/16 in Milling Dia. Carbide AlTiN Straight Length of Cut 1 in Overall Length 2 1/2 in Shank Dia. 7/16 in more

Micro 100 Sq. End Mill Single End Carb 0.0300 RME-030-2

Square End Mill 1/64 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 5/64 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Sq. End Mill Single End Carb 1/2 GEM-500-4X

Square End Mill 1/2 in Milling Dia. Carbide AlTiN Straight Length of Cut 1 in Overall Length 3 in Shank Dia. 1/2 in more

Micro 100 Ball End Mill Single End 1/8 Carbide BEF-125-1500

Ball End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Non-Coolant Through more

Micro 100 Sq. End Mill Single End Carb 1/2 GEM-500-2

Square End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1 in Overall Length 3 in Shank Dia. 1/2 in more

Micro 100 Sq. End Mill Single End Carb 1/2 ARM-500-5

Square End Mill 1/2 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1 in Overall Length 3 in Shank Dia. 1/2 in more

Micro 100 Sq. End Mill Single End Carb 0.0230 RME-023-2X

Square End Mill 1/64 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/16 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Ball End Mill Single End 1.20mm Carbide MMBM-012-15X

Ball End Mill 1.2 mm Milling Dia. Carbide AlTiN Non-Coolant Through more

Micro 100 Sq. End Mill Single End Carb 3/4 GEM-750-4

Square End Mill 3/4 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1 1/2 in Overall Length 4 in Shank Dia. 3/4 in more

Micro 100 Sq. End Mill Single End Carb 1/4 SEM-250-03X

Square End Mill 1/4 in Milling Dia. Carbide AlTiN Straight Length of Cut 1/2 in Overall Length 2 in Shank Dia. 1/4 in more

Micro 100 Ball End Mill Single End 1/8 Carbide BEM-125-02X

Ball End Mill 1/8 in Milling Dia. Carbide AlTiN Non-Coolant Through more

Micro 100 Sq. End Mill Single End Carb 0.0900 MEF-090-250

Square End Mill 5/64 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/8 in Overall Length 1 1/2 in Shank Dia. 1/8 in Neck Dia. 5/64 in more

Micro 100 Sq. End Mill Single End Carb 1/8 GEM-125-2

Square End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 1/2 in Overall Length 1 1/2 in Shank Dia. 1/8 in more

Micro 100 Ball End Mill Single End 1.50mm Carbide MMBM-015-20X

Ball End Mill 1.5 mm Milling Dia. Carbide AlTiN Non-Coolant Through more

Micro 100 Ball End Mill Single End 3/8 Carbide BEM-375-02X

Ball End Mill 3/8 in Milling Dia. Carbide AlTiN Non-Coolant Through more